diff --git a/gdb.txt b/gdb.txt deleted file mode 100644 index 4cf6ff1..0000000 --- a/gdb.txt +++ /dev/null @@ -1,1907 +0,0 @@ -Undefined command: "". Try "help". -Remote debugging using :1234 -0xffffffff800067c4 in clks_cpu_halt_forever () -=> 0xffffffff800067c4 : eb fd jmp 0xffffffff800067c3 -Breakpoint 1 at 0xffffffff8000bb07 -Breakpoint 2 at 0xffffffff80002d5a -Breakpoint 3 at 0xffffffff800025dc -Breakpoint 4 at 0xffffffff800082f0 -Continuing. - -Breakpoint 1, 0xffffffff8000bb07 in clks_shell_cmd_elfloader () -=> 0xffffffff8000bb07 : 48 81 ec 10 01 00 00 sub $0x110,%rsp -#0 0xffffffff8000bb07 in clks_shell_cmd_elfloader () -#1 0xffffffff8000c7c7 in clks_shell_execute_line () -#2 0xffffffff8000c92c in clks_shell_handle_char () -#3 0xffffffff8000cdae in clks_shell_drain_input () -#4 0xffffffff8000cddb in clks_shell_pump_input () -#5 0xffffffff800066db in clks_keyboard_handle_scancode () -#6 0xffffffff800055e6 in clks_interrupt_dispatch () -#7 0xffffffff8000e883 in clks_isr_common () -#8 0xffffffff8000d7a6 in clks_tty_draw_cursor () -#9 0xffffffff80006fcf in clks_kernel_main () -#10 0xffffffff80000014 in _start () -rax 0xffff80003ff96bb8 -140736415044680 -rbx 0x0 0 -rcx 0xffffffff80010c68 -2147414936 -rdx 0x0 0 -rsi 0xffffffff80010c68 -2147414936 -rdi 0xffff80003ff96bb8 -140736415044680 -rbp 0xffff80003ff96b98 0xffff80003ff96b98 -rsp 0xffff80003ff96b98 0xffff80003ff96b98 -r8 0xa0 160 -r9 0x400000 4194304 -r10 0x0 0 -r11 0x0 0 -r12 0x0 0 -r13 0x0 0 -r14 0x0 0 -r15 0x0 0 -rip 0xffffffff8000bb07 0xffffffff8000bb07 -eflags 0x46 [ IOPL=0 ZF PF ] -cs 0x28 40 -ss 0x30 48 -ds 0x30 48 -es 0x30 48 -fs 0x30 48 -gs 0x30 48 -fs_base 0x0 0 -gs_base 0x0 0 -k_gs_base 0x0 0 -cr0 0x80010011 [ PG WP ET PE ] -cr2 0x0 0 -cr3 0x3ff86000 [ PDBR=262022 PCID=0 ] -cr4 0x20 [ PAE ] -cr8 0x0 0 -efer 0xd00 [ NXE LMA LME ] -xmm0 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm1 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm2 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm3 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm4 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm5 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm6 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm7 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm8 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm9 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm10 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm11 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm12 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm13 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm14 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm15 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -mxcsr 0x1f80 [ IM DM ZM OM UM PM ] -=> 0xffffffff8000bb07 : sub $0x110,%rsp - 0xffffffff8000bb0e : mov %rdi,-0x108(%rbp) - 0xffffffff8000bb15 : mov -0x108(%rbp),%rax - 0xffffffff8000bb1c : mov %rax,-0x8(%rbp) - 0xffffffff8000bb20 : movq $0x0,-0xd8(%rbp) - 0xffffffff8000bb2b : movq $0xffffffffffffffff,-0xf8(%rbp) - 0xffffffff8000bb36 : cmpq $0x0,-0x8(%rbp) - 0xffffffff8000bb3b : je 0xffffffff8000bb48 - 0xffffffff8000bb3d : mov -0x8(%rbp),%rax - 0xffffffff8000bb41 : movzbl (%rax),%eax - 0xffffffff8000bb44 : test %al,%al - 0xffffffff8000bb46 : jne 0xffffffff8000bb50 - 0xffffffff8000bb48 : movq $0xffffffff80010845,-0x8(%rbp) - 0xffffffff8000bb50 : mov -0x8(%rbp),%rax - 0xffffffff8000bb54 : movzbl (%rax),%eax - 0xffffffff8000bb57 : cmp $0x2f,%al -Continuing. - -Breakpoint 2, 0xffffffff80002d5a in clks_exec_run_path () -=> 0xffffffff80002d5a : 48 81 ec 00 03 00 00 sub $0x300,%rsp -No symbol table is loaded. Use the "file" command. -No symbol table is loaded. Use the "file" command. -No symbol table is loaded. Use the "file" command. -No symbol table is loaded. Use the "file" command. -#0 0xffffffff80002d5a in clks_exec_run_path () -#1 0xffffffff8000bcdb in clks_shell_cmd_elfloader () -#2 0xffffffff8000c7c7 in clks_shell_execute_line () -#3 0xffffffff8000c92c in clks_shell_handle_char () -#4 0xffffffff8000cdae in clks_shell_drain_input () -#5 0xffffffff8000cddb in clks_shell_pump_input () -#6 0xffffffff800066db in clks_keyboard_handle_scancode () -#7 0xffffffff800055e6 in clks_interrupt_dispatch () -#8 0xffffffff8000e883 in clks_isr_common () -#9 0xffffffff8000d7a6 in clks_tty_draw_cursor () -#10 0xffffffff80006fcf in clks_kernel_main () -#11 0xffffffff80000014 in _start () -rax 0xffff80003ff96ac8 -140736415044920 -rbx 0x0 0 -rcx 0x1400 5120 -rdx 0xffff80003ff96aa0 -140736415044960 -rsi 0xffff80003ff96aa0 -140736415044960 -rdi 0xffff80003ff96ac8 -140736415044920 -rbp 0xffff80003ff96a78 0xffff80003ff96a78 -rsp 0xffff80003ff96a78 0xffff80003ff96a78 -r8 0xe6e6e6 15132390 -r9 0x400000 4194304 -r10 0x0 0 -r11 0x0 0 -r12 0x0 0 -r13 0x0 0 -r14 0x0 0 -r15 0x0 0 -rip 0xffffffff80002d5a 0xffffffff80002d5a -eflags 0x46 [ IOPL=0 ZF PF ] -cs 0x28 40 -ss 0x30 48 -ds 0x30 48 -es 0x30 48 -fs 0x30 48 -gs 0x30 48 -fs_base 0x0 0 -gs_base 0x0 0 -k_gs_base 0x0 0 -cr0 0x80010011 [ PG WP ET PE ] -cr2 0x0 0 -cr3 0x3ff86000 [ PDBR=262022 PCID=0 ] -cr4 0x20 [ PAE ] -cr8 0x0 0 -efer 0xd00 [ NXE LMA LME ] -xmm0 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm1 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm2 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm3 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm4 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm5 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm6 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm7 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm8 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm9 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm10 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm11 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm12 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm13 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm14 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm15 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -mxcsr 0x1f80 [ IM DM ZM OM UM PM ] -=> 0xffffffff80002d5a : sub $0x300,%rsp - 0xffffffff80002d61 : mov %rdi,-0x2f8(%rbp) - 0xffffffff80002d68 : mov %rsi,-0x300(%rbp) - 0xffffffff80002d6f : movq $0x0,-0x20(%rbp) - 0xffffffff80002d77 : mov 0x116da(%rip),%rax # 0xffffffff80014458 - 0xffffffff80002d7e : add $0x1,%rax - 0xffffffff80002d82 : mov %rax,0x116cf(%rip) # 0xffffffff80014458 - 0xffffffff80002d89 : cmpq $0x0,-0x300(%rbp) - 0xffffffff80002d91 : je 0xffffffff80002da1 - 0xffffffff80002d93 : mov -0x300(%rbp),%rax - 0xffffffff80002d9a : movq $0xffffffffffffffff,(%rax) - 0xffffffff80002da1 : cmpq $0x0,-0x2f8(%rbp) - 0xffffffff80002da9 : je 0xffffffff80002db9 - 0xffffffff80002dab : mov -0x2f8(%rbp),%rax - 0xffffffff80002db2 : movzbl (%rax),%eax - 0xffffffff80002db5 : cmp $0x2f,%al -No symbol table is loaded. Use the "file" command. -Continuing. - -Program received signal SIGQUIT, Quit. -0xffffffff80007244 in clks_log_append_text () -=> 0xffffffff80007244 : 0f b6 00 movzbl (%rax),%eax -#0 0xffffffff80007244 in clks_log_append_text () -#1 0xffffffff8000749f in clks_log () -#2 0xffffffff80002d07 in clks_exec_prepare_x86_exec_mode () -#3 0xffffffff80002de0 in clks_exec_run_path () -#4 0xffffffff8000bcdb in clks_shell_cmd_elfloader () -#5 0xffffffff8000c7c7 in clks_shell_execute_line () -#6 0xffffffff8000c92c in clks_shell_handle_char () -#7 0xffffffff8000cdae in clks_shell_drain_input () -#8 0xffffffff8000cddb in clks_shell_pump_input () -#9 0xffffffff800066db in clks_keyboard_handle_scancode () -#10 0xffffffff800055e6 in clks_interrupt_dispatch () -#11 0xffffffff8000e883 in clks_isr_common () -#12 0xffffffff8000d7a6 in clks_tty_draw_cursor () -#13 0xffffffff80006fcf in clks_kernel_main () -#14 0xffffffff80000014 in _start () -rax 0xffffffff80010010 -2147418096 -rbx 0x0 0 -rcx 0xffff80003ff96640 -140736415046080 -rdx 0xffffffff80010010 -2147418096 -rsi 0xffff80003ff96640 -140736415046080 -rdi 0xffff80003ff96648 -140736415046072 -rbp 0xffff80003ff96608 0xffff80003ff96608 -rsp 0xffff80003ff965e0 0xffff80003ff965e0 -r8 0xe6e6e6 15132390 -r9 0x400000 4194304 -r10 0x0 0 -r11 0x0 0 -r12 0x0 0 -r13 0x0 0 -r14 0x0 0 -r15 0x0 0 -rip 0xffffffff80007244 0xffffffff80007244 -eflags 0x82 [ IOPL=0 SF ] -cs 0x28 40 -ss 0x30 48 -ds 0x30 48 -es 0x30 48 -fs 0x30 48 -gs 0x30 48 -fs_base 0x0 0 -gs_base 0x0 0 -k_gs_base 0x0 0 -cr0 0x80010011 [ PG WP ET PE ] -cr2 0xffffffff80130540 -2146237120 -cr3 0x3ff86000 [ PDBR=262022 PCID=0 ] -cr4 0x20 [ PAE ] -cr8 0x0 0 -efer 0x500 [ LMA LME ] -xmm0 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm1 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm2 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm3 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm4 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm5 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm6 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm7 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm8 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm9 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm10 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm11 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm12 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm13 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm14 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -xmm15 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 }, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x0} -mxcsr 0x1f80 [ IM DM ZM OM UM PM ] -=> 0xffffffff80007244 : movzbl (%rax),%eax - 0xffffffff80007247 : test %al,%al - 0xffffffff80007249 : jne 0xffffffff80007210 - 0xffffffff8000724b : nop - 0xffffffff8000724c : nop - 0xffffffff8000724d : leave - 0xffffffff8000724e : ret - 0xffffffff8000724f : endbr64 - 0xffffffff80007253 : push %rbp - 0xffffffff80007254 : mov %rsp,%rbp - 0xffffffff80007257 : sub $0x28,%rsp - 0xffffffff8000725b : mov %rdi,-0x18(%rbp) - 0xffffffff8000725f : mov %rsi,-0x20(%rbp) - 0xffffffff80007263 : mov %rdx,-0x28(%rbp) - 0xffffffff80007267 : mov -0x20(%rbp),%rcx - 0xffffffff8000726b : mov -0x18(%rbp),%rax -Continuing. -[Inferior 1 (process 1) exited normally] -The program is not being run. -The program is not being run. -Undefined catch command: "/tmp/cmleonos-gdb.log". Try "help catch". -Quit -Quit -Undefined command: "Quit". Try "help". -List of classes of commands: - -aliases -- User-defined aliases of other commands. -breakpoints -- Making program stop at certain points. -data -- Examining data. -files -- Specifying and examining files. -internals -- Maintenance commands. -obscure -- Obscure features. -running -- Running the program. -stack -- Examining the stack. -status -- Status inquiries. -support -- Support facilities. -text-user-interface -- TUI is the GDB text based interface. -tracepoints -- Tracing of program execution without stopping the program. -user-defined -- User-defined commands. - -Type "help" followed by a class name for a list of commands in that class. -Type "help all" for the list of all commands. -Type "help" followed by command name for full documentation. -Type "apropos word" to search for commands related to "word". -Type "apropos -v word" for full documentation of commands related to "word". -Command name abbreviations are allowed if unambiguous. - -Command class: aliases - - -Command class: breakpoints - -awatch -- Set an access watchpoint for EXPRESSION. -break, brea, bre, br, b -- Set breakpoint at specified location. -break-range -- Set a breakpoint for an address range. -catch -- Set catchpoints to catch events. -catch assert -- Catch failed Ada assertions, when raised. -catch catch -- Catch an exception, when caught. -catch exception -- Catch Ada exceptions, when raised. -catch exec -- Catch calls to exec. -catch fork -- Catch calls to fork. -catch handlers -- Catch Ada exceptions, when handled. -catch load -- Catch loads of shared libraries. -catch rethrow -- Catch an exception, when rethrown. -catch signal -- Catch signals by their names and/or numbers. -catch syscall -- Catch system calls by their names, groups and/or numbers. -catch throw -- Catch an exception, when thrown. -catch unload -- Catch unloads of shared libraries. -catch vfork -- Catch calls to vfork. -clear, cl -- Clear breakpoint at specified location. -commands -- Set commands to be executed when the given breakpoints are hit. -condition -- Specify breakpoint number N to break only if COND is true. -delete, del, d -- Delete all or some breakpoints. -delete bookmark -- Delete a bookmark from the bookmark list. -delete breakpoints -- Delete all or some breakpoints or auto-display expressions. -delete checkpoint -- Delete a checkpoint (experimental). -delete display -- Cancel some expressions to be displayed when program stops. -delete mem -- Delete memory region. -delete tracepoints, delete tr -- Delete specified tracepoints. -delete tvariable -- Delete one or more trace state variables. -disable, disa, dis -- Disable all or some breakpoints. -disable breakpoints -- Disable all or some breakpoints. -disable display -- Disable some expressions to be displayed when program stops. -disable frame-filter -- GDB command to disable the specified frame-filter. -disable mem -- Disable memory region. -disable missing-debug-handler -- GDB command to disable missing debug handlers. -disable pretty-printer -- GDB command to disable the specified pretty-printer. -disable probes -- Disable probes. -disable type-printer -- GDB command to disable the specified type-printer. -disable unwinder -- GDB command to disable the specified unwinder. -disable xmethod -- GDB command to disable a specified (group of) xmethod(s). -dprintf -- Set a dynamic printf at specified location. -enable, en -- Enable all or some breakpoints. -enable breakpoints -- Enable all or some breakpoints. -enable breakpoints count -- Enable some breakpoints for COUNT hits. -enable breakpoints delete -- Enable some breakpoints and delete when hit. -enable breakpoints once -- Enable some breakpoints for one hit. -enable count -- Enable some breakpoints for COUNT hits. -enable delete -- Enable some breakpoints and delete when hit. -enable display -- Enable some expressions to be displayed when program stops. -enable frame-filter -- GDB command to enable the specified frame-filter. -enable mem -- Enable memory region. -enable missing-debug-handler -- GDB command to enable missing debug handlers. -enable once -- Enable some breakpoints for one hit. -enable pretty-printer -- GDB command to enable the specified pretty-printer. -enable probes -- Enable probes. -enable type-printer -- GDB command to enable the specified type printer. -enable unwinder -- GDB command to enable unwinders. -enable xmethod -- GDB command to enable a specified (group of) xmethod(s). -ftrace -- Set a fast tracepoint at specified location. -hbreak -- Set a hardware assisted breakpoint. -ignore -- Set ignore-count of breakpoint number N to COUNT. -rbreak -- Set a breakpoint for all functions matching REGEXP. -rwatch -- Set a read watchpoint for EXPRESSION. -save -- Save breakpoint definitions as a script. -save breakpoints -- Save current breakpoint definitions as a script. -save gdb-index -- Save a gdb-index file. -save tracepoints -- Save current tracepoint definitions as a script. -skip -- Ignore a function while stepping. -skip delete -- Delete skip entries. -skip disable -- Disable skip entries. -skip enable -- Enable skip entries. -skip file -- Ignore a file while stepping. -skip function -- Ignore a function while stepping. -strace -- Set a static tracepoint at location or marker. -tbreak -- Set a temporary breakpoint. -tcatch -- Set temporary catchpoints to catch events. -tcatch assert -- Catch failed Ada assertions, when raised. -tcatch catch -- Catch an exception, when caught. -tcatch exception -- Catch Ada exceptions, when raised. -tcatch exec -- Catch calls to exec. -tcatch fork -- Catch calls to fork. -tcatch handlers -- Catch Ada exceptions, when handled. -tcatch load -- Catch loads of shared libraries. -tcatch rethrow -- Catch an exception, when rethrown. -tcatch signal -- Catch signals by their names and/or numbers. -tcatch syscall -- Catch system calls by their names, groups and/or numbers. -tcatch throw -- Catch an exception, when thrown. -tcatch unload -- Catch unloads of shared libraries. -tcatch vfork -- Catch calls to vfork. -thbreak -- Set a temporary hardware assisted breakpoint. -trace, trac, tra, tr, tp -- Set a tracepoint at specified location. -watch -- Set a watchpoint for EXPRESSION. - -Command class: data - -agent-printf -- Target agent only formatted printing, like the C "printf" function. -append -- Append target code/data to a local file. -append binary -- Append target code/data to a raw binary file. -append binary memory -- Append contents of memory to a raw binary file. -append binary value -- Append the value of an expression to a raw binary file. -append memory -- Append contents of memory to a raw binary file. -append value -- Append the value of an expression to a raw binary file. -call -- Call a function in the program. -disassemble -- Disassemble a specified section of memory. -display -- Print value of expression EXP each time the program stops. -dump -- Dump target code/data to a local file. -dump binary -- Write target code/data to a raw binary file. -dump binary memory -- Write contents of memory to a raw binary file. -dump binary value -- Write the value of an expression to a raw binary file. -dump ihex -- Write target code/data to an intel hex file. -dump ihex memory -- Write contents of memory to an ihex file. -dump ihex value -- Write the value of an expression to an ihex file. -dump memory -- Write contents of memory to a raw binary file. -dump srec -- Write target code/data to an srec file. -dump srec memory -- Write contents of memory to an srec file. -dump srec value -- Write the value of an expression to an srec file. -dump tekhex -- Write target code/data to a tekhex file. -dump tekhex memory -- Write contents of memory to a tekhex file. -dump tekhex value -- Write the value of an expression to a tekhex file. -dump value -- Write the value of an expression to a raw binary file. -dump verilog -- Write target code/data to a verilog hex file. -dump verilog memory -- Write contents of memory to a verilog hex file. -dump verilog value -- Write the value of an expression to a verilog hex file. -explore -- Explore a value or a type valid in the current context. -explore type -- Explore a type or the type of an expression. -explore value -- Explore value of an expression valid in the current context. -find -- Search memory for a sequence of bytes. -init-if-undefined -- Initialize a convenience variable if necessary. -mem -- Define attributes for memory region or reset memory region handling to target-based. -memory-tag -- Generic command for printing and manipulating memory tag properties. -memory-tag check -- Validate a pointer's logical tag against the allocation tag. -memory-tag print-allocation-tag -- Print the allocation tag for ADDRESS. -memory-tag print-logical-tag -- Print the logical tag from POINTER. -memory-tag set-allocation-tag -- Set the allocation tag(s) for a memory range. -memory-tag with-logical-tag -- Print a POINTER with a specific logical TAG. -output -- Like "print" but don't put in value history and don't print newline. -print, inspect, p -- Print value of expression EXP. -print-object, po -- Ask an Objective-C object to print itself. -printf -- Formatted printing, like the C "printf" function. -ptype -- Print definition of type TYPE. -restore -- Restore the contents of FILE to target memory. -set -- Evaluate expression EXP and assign result to variable VAR. -set ada -- Prefix command for changing Ada-specific settings. -set ada print-signatures -- Enable or disable the output of formal and return types for functions in the overloads selection menu. -set ada source-charset -- Set the Ada source character set. -set ada trust-PAD-over-XVS -- Enable or disable an optimization trusting PAD types over XVS types. -set agent -- Set debugger's willingness to use agent as a helper. -set always-read-ctf -- Set whether CTF is always read. -set annotate -- Set annotation_level. -set architecture, set processor -- Set architecture of target. -set args -- Set argument list to give program being debugged when it is started. -set auto-connect-native-target -- Set whether GDB may automatically connect to the native target. -set auto-load -- Auto-loading specific settings. -set auto-load gdb-scripts -- Enable or disable auto-loading of canned sequences of commands scripts. -set auto-load libthread-db -- Enable or disable auto-loading of inferior specific libthread_db. -set auto-load local-gdbinit -- Enable or disable auto-loading of .gdbinit script in current directory. -set auto-load python-scripts -- Set the debugger's behaviour regarding auto-loaded Python scripts. -set auto-load safe-path -- Set the list of files and directories that are safe for auto-loading. -set auto-load scripts-directory -- Set the list of directories from which to load auto-loaded scripts. -set auto-solib-add -- Set autoloading of shared library symbols. -set backtrace -- Set backtrace specific variables. -set backtrace limit -- Set an upper bound on the number of backtrace levels. -set backtrace past-entry -- Set whether backtraces should continue past the entry point of a program. -set backtrace past-main -- Set whether backtraces should continue past "main". -set basenames-may-differ -- Set whether a source file may have multiple base names. -set breakpoint -- Breakpoint specific settings. -set breakpoint always-inserted -- Set mode for inserting breakpoints. -set breakpoint auto-hw -- Set automatic usage of hardware breakpoints. -set breakpoint condition-evaluation -- Set mode of breakpoint condition evaluation. -set breakpoint pending -- Set debugger's behavior regarding pending breakpoints. -set can-use-hw-watchpoints -- Set debugger's willingness to use watchpoint hardware. -set case-sensitive -- Set case sensitivity in name search (on/off/auto). -set charset -- Set the host and target character sets. -set check, set ch, set c -- Set the status of the type/range checker. -set check range -- Set range checking (on/warn/off/auto). -set check type -- Set strict type checking. -set circular-trace-buffer -- Set target's use of circular trace buffer. -set code-cache -- Set cache use for code segment access. -set coerce-float-to-double -- Set coercion of floats to doubles when calling functions. -set compile-args -- Set compile command GCC command-line arguments. -set compile-gcc -- Set compile command GCC driver filename. -set complaints -- Set max number of complaints about incorrect symbols. -set confirm -- Set whether to confirm potentially dangerous operations. -set cp-abi -- Set the ABI used for inspecting C++ objects. -set cwd -- Set the current working directory to be used when the inferior is started. -set data-directory -- Set GDB's data directory. -set dcache -- Use this command to set number of lines in dcache and line-size. -set dcache line-size -- Set dcache line size in bytes (must be power of 2). -set dcache size -- Set number of dcache lines. -set debug -- Generic command for setting gdb debugging flags. -set debug arch -- Set architecture debugging. -set debug auto-load -- Set auto-load verifications debugging. -set debug bfd-cache -- Set bfd cache debugging. -set debug breakpoint -- Set breakpoint location debugging. -set debug check-physname -- Set cross-checking of "physname" code against demangler. -set debug coff-pe-read -- Set coff PE read debugging. -set debug compile -- Set compile command debugging. -set debug compile-cplus-scopes -- Set debugging of C++ compile scopes. -set debug compile-cplus-types -- Set debugging of C++ compile type conversion. -set debug displaced -- Set displaced stepping debugging. -set debug dwarf-die -- Set debugging of the DWARF DIE reader. -set debug dwarf-line -- Set debugging of the dwarf line reader. -set debug dwarf-read -- Set debugging of the DWARF reader. -set debug entry-values -- Set entry values and tail call frames debugging. -set debug event-loop -- Set event-loop debugging. -set debug expression -- Set expression debugging. -set debug fortran-array-slicing -- Set debugging of Fortran array slicing. -set debug frame -- Set frame debugging. -set debug index-cache -- Set display of index-cache debug messages. -set debug infcall -- Set inferior call debugging. -set debug infrun -- Set inferior debugging. -set debug jit -- Set JIT debugging. -set debug libthread-db -- Set libthread-db debugging. -set debug linux-namespaces -- Set debugging of GNU/Linux namespaces module. -set debug linux-nat -- Set debugging of GNU/Linux native target. -set debug notification -- Set debugging of async remote notification. -set debug observer -- Set observer debugging. -set debug overload -- Set debugging of C++ overloading. -set debug parser -- Set parser debugging. -set debug py-breakpoint -- Set Python breakpoint debugging. -set debug py-micmd -- Set Python micmd debugging. -set debug py-unwind -- Set Python unwinder debugging. -set debug record -- Set debugging of record/replay feature. -set debug remote -- Set debugging of remote protocol. -set debug remote-packet-max-chars -- Set the maximum number of characters to display for each remote packet. -set debug separate-debug-file -- Set printing of separate debug info file search debug. -set debug serial -- Set serial debugging. -set debug skip -- Set whether to print the debug output about skipping files and functions. -set debug solib -- Set solib debugging. -set debug stap-expression -- Set SystemTap expression debugging. -set debug symbol-lookup -- Set debugging of symbol lookup. -set debug symfile -- Set debugging of the symfile functions. -set debug symtab-create -- Set debugging of symbol table creation. -set debug target -- Set target debugging. -set debug threads -- Set thread debugging. -set debug timestamp -- Set timestamping of debugging messages. -set debug tui -- Set tui debugging. -set debug varobj -- Set varobj debugging. -set debug xml -- Set XML parser debugging. -set debug-file-directory -- Set the directories where separate debug symbols are searched for. -set debuginfod -- Set debuginfod options. -set debuginfod enabled -- Set whether to use debuginfod. -set debuginfod urls -- Set the list of debuginfod server URLs. -set debuginfod verbose -- Set verbosity of debuginfod output. -set default-collect -- Set the list of expressions to collect by default. -set demangle-style -- Set the current C++ demangling style. -set detach-on-fork -- Set whether gdb will detach the child of a fork. -set direct-call-timeout -- Set the timeout, for direct calls to inferior function calls. -set directories -- Set the search path for finding source files. -set disable-randomization -- Set disabling of debuggee's virtual address space randomization. -set disassemble-next-line -- Set whether to disassemble next source line or insn when execution stops. -set disassembler-options -- Set the disassembler options. -set disassembly-flavor -- Set the disassembly flavor. -set disconnected-dprintf -- Set whether dprintf continues after GDB disconnects. -set disconnected-tracing -- Set whether tracing continues after GDB disconnects. -set displaced-stepping -- Set debugger's willingness to use displaced stepping. -set dprintf-channel -- Set the channel to use for dynamic printf. -set dprintf-function -- Set the function to use for dynamic printf. -set dprintf-style -- Set the style of usage for dynamic printf. -set dump-excluded-mappings -- Set whether gcore should dump mappings marked with the VM_DONTDUMP flag. -set editing -- Set editing of command lines as they are typed. -set endian -- Set endianness of target. -set environment -- Set environment variable value to give the program. -set exec-direction -- Set direction of execution. -set exec-done-display -- Set notification of completion for asynchronous execution commands. -set exec-file-mismatch -- Set exec-file-mismatch handling (ask|warn|off). -set exec-wrapper -- Set a wrapper for running programs. -set extended-prompt -- Set the extended prompt. -set extension-language -- Set mapping between filename extension and source language. -set filename-display -- Set how to display filenames. -set follow-exec-mode -- Set debugger response to a program call of exec. -set follow-fork-mode -- Set debugger response to a program call of fork or vfork. -set fortran -- Prefix command for changing Fortran-specific settings. -set fortran repack-array-slices -- Enable or disable repacking of non-contiguous array slices. -set frame-filter -- Prefix command for 'set' frame-filter related operations. -set frame-filter priority -- GDB command to set the priority of the specified frame-filter. -set gnutarget, set g -- Set the current BFD target. -set guile, set gu -- Prefix command for Guile preference settings. -set guile print-stack -- Set mode for Guile exception printing on error. -set height -- Set number of lines in a page for GDB output pagination. -set history -- Generic command for setting command history parameters. -set history expansion -- Set history expansion on command input. -set history filename -- Set the filename in which to record the command history. -set history remove-duplicates -- Set how far back in history to look for and remove duplicate entries. -set history save -- Set saving of the history record on exit. -set history size -- Set the size of the command history. -set host-charset -- Set the host character set. -set index-cache -- Set index-cache options. -set index-cache directory -- Set the directory of the index cache. -set index-cache enabled -- Enable the index cache. -set indirect-call-timeout -- Set the timeout, for indirect calls to inferior function calls. -set inferior-tty, tty -- Set terminal for future runs of program being debugged. -set input-radix -- Set default input radix for entering numbers. -set interactive-mode -- Set whether GDB's standard input is a terminal. -set language -- Set the current source language. -set libthread-db-search-path -- Set search path for libthread_db. -set listsize -- Set number of source lines gdb will list by default. -set logging -- Set logging options. -set logging debugredirect -- Set the logging debug output mode. -set logging enabled -- Enable logging. -set logging file -- Set the current logfile. -set logging overwrite -- Set whether logging overwrites or appends to the log file. -set logging redirect -- Set the logging output mode. -set max-completions -- Set maximum number of completion candidates. -set max-user-call-depth -- Set the max call depth for non-python/scheme user-defined commands. -set max-value-size -- Set maximum sized value gdb will load from the inferior. -set may-call-functions -- Set permission to call functions in the program. -set may-insert-breakpoints -- Set permission to insert breakpoints in the target. -set may-insert-fast-tracepoints -- Set permission to insert fast tracepoints in the target. -set may-insert-tracepoints -- Set permission to insert tracepoints in the target. -set may-interrupt -- Set permission to interrupt or signal the target. -set may-write-memory -- Set permission to write into target memory. -set may-write-registers -- Set permission to write into registers. -set mem -- Memory regions settings. -set mem inaccessible-by-default -- Set handling of unknown memory regions. -set mi-async -- Set whether MI asynchronous mode is enabled. -set mpx -- Set Intel Memory Protection Extensions specific variables. -set multiple-symbols -- Set how the debugger handles ambiguities in expressions. -set non-stop -- Set whether gdb controls the inferior in non-stop mode. -set observer -- Set whether gdb controls the inferior in observer mode. -set opaque-type-resolution -- Set resolution of opaque struct/class/union types (if set before loading symbols). -set osabi -- Set OS ABI of target. -set output-radix -- Set default output radix for printing of values. -set overload-resolution -- Set overload resolution in evaluating C++ functions. -set pagination -- Set state of GDB output pagination. -set print, set pr, set p -- Generic command for setting how things print. -set print address -- Set printing of addresses. -set print array -- Set pretty formatting of arrays. -set print array-indexes -- Set printing of array indexes. -set print asm-demangle -- Set demangling of C++/ObjC names in disassembly listings. -set print characters -- Set limit on string chars to print. -set print demangle -- Set demangling of encoded C++/ObjC names when displaying symbols. -set print elements -- Set limit on array elements to print. -set print entry-values -- Set printing of function arguments at function entry. -set print finish -- Set whether `finish' prints the return value. -set print frame-arguments -- Set printing of non-scalar frame arguments. -set print frame-info -- Set printing of frame information. -set print inferior-events -- Set printing of inferior events (such as inferior start and exit). -set print max-depth -- Set maximum print depth for nested structures, unions and arrays. -set print max-symbolic-offset -- Set the largest offset that will be printed in form. -set print memory-tag-violations -- Set printing of memory tag violations for pointers. -set print nibbles -- Set whether to print binary values in groups of four bits. -set print null-stop -- Set printing of char arrays to stop at first null char. -set print object -- Set printing of C++ virtual function tables. -set print pascal_static-members -- Set printing of pascal static members. -set print pretty -- Set pretty formatting of structures. -set print raw-frame-arguments -- Set whether to print frame arguments in raw form. -set print raw-values -- Set whether to print values in raw form. -set print repeats -- Set threshold for repeated print elements. -set print sevenbit-strings -- Set printing of 8-bit characters in strings as \nnn. -set print static-members -- Set printing of C++ static members. -set print symbol -- Set printing of symbol names when printing pointers. -set print symbol-filename -- Set printing of source filename and line number with . -set print symbol-loading -- Set printing of symbol loading messages. -set print thread-events -- Set printing of thread events (such as thread start and exit). -set print type -- Generic command for showing type-printing settings. -set print type hex -- Set printing of struct members sizes and offsets using hex notation. -set print type methods -- Set printing of methods defined in classes. -set print type nested-type-limit -- Set the number of recursive nested type definitions to print ("unlimited" or -1 to show all). -set print type typedefs -- Set printing of typedefs defined in classes. -set print union -- Set printing of unions interior to structures. -set print vtbl -- Set printing of C++ virtual function tables. -set prompt -- Set gdb's prompt. -set python -- Prefix command for python preference settings. -set python dont-write-bytecode -- Set whether the Python interpreter should avoid byte-compiling python modules. -set python ignore-environment -- Set whether the Python interpreter should ignore environment variables. -set python print-stack -- Set mode for Python stack dump on error. -set radix -- Set default input and output number radices. -set range-stepping -- Enable or disable range stepping. -set ravenscar -- Prefix command for changing Ravenscar-specific settings. -set ravenscar task-switching -- Enable or disable support for GNAT Ravenscar tasks. -set record, set rec -- Set record options. -set record btrace -- Set record options. -set record btrace bts -- Set record btrace bts options. -set record btrace bts buffer-size -- Set the record/replay bts buffer size. -set record btrace cpu -- Set the cpu to be used for trace decode. -set record btrace cpu auto -- Automatically determine the cpu to be used for trace decode. -set record btrace cpu none -- Do not enable errata workarounds for trace decode. -set record btrace pt -- Set record btrace pt options. -set record btrace pt buffer-size -- Set the record/replay pt buffer size. -set record btrace replay-memory-access -- Set what memory accesses are allowed during replay. -set record full -- Set record options. -set record full insn-number-max -- Set record/replay buffer limit. -set record full memory-query -- Set whether query if PREC cannot record memory change of next instruction. -set record full stop-at-limit -- Set whether record/replay stops when record/replay buffer becomes full. -set record function-call-history-size -- Set number of function to print in "record function-call-history". -set record instruction-history-size -- Set number of instructions to print in "record instruction-history". -set remote -- Remote protocol specific variables. -set remote TracepointSource-packet -- Set use of remote protocol `TracepointSource' (TracepointSource) packet. -set remote Z-packet -- Set use of remote protocol `Z' packets. -set remote access-watchpoint-packet -- Set use of remote protocol `Z4' (access-watchpoint) packet. -set remote agent-packet -- Set use of remote protocol `QAgent' (agent) packet. -set remote allow-packet -- Set use of remote protocol `QAllow' (allow) packet. -set remote attach-packet -- Set use of remote protocol `vAttach' (attach) packet. -set remote binary-download-packet, set remote X-packet -- Set use of remote protocol `X' (binary-download) packet. -set remote breakpoint-commands-packet -- Set use of remote protocol `BreakpointCommands' (breakpoint-commands) packet. -set remote btrace-conf-bts-size-packet -- Set use of remote protocol `Qbtrace-conf:bts:size' (btrace-conf-bts-size) packet. -set remote btrace-conf-pt-size-packet -- Set use of remote protocol `Qbtrace-conf:pt:size' (btrace-conf-pt-size) packet. -set remote catch-syscalls-packet -- Set use of remote protocol `QCatchSyscalls' (catch-syscalls) packet. -set remote conditional-breakpoints-packet -- Set use of remote protocol `ConditionalBreakpoints' (conditional-breakpoints) packet. -set remote conditional-tracepoints-packet -- Set use of remote protocol `ConditionalTracepoints' (conditional-tracepoints) packet. -set remote ctrl-c-packet -- Set use of remote protocol `vCtrlC' (ctrl-c) packet. -set remote disable-btrace-packet -- Set use of remote protocol `Qbtrace:off' (disable-btrace) packet. -set remote disable-randomization-packet -- Set use of remote protocol `QDisableRandomization' (disable-randomization) packet. -set remote enable-btrace-bts-packet -- Set use of remote protocol `Qbtrace:bts' (enable-btrace-bts) packet. -set remote enable-btrace-pt-packet -- Set use of remote protocol `Qbtrace:pt' (enable-btrace-pt) packet. -set remote environment-hex-encoded-packet -- Set use of remote protocol `QEnvironmentHexEncoded' (environment-hex-encoded) packet. -set remote environment-reset-packet -- Set use of remote protocol `QEnvironmentReset' (environment-reset) packet. -set remote environment-unset-packet -- Set use of remote protocol `QEnvironmentUnset' (environment-unset) packet. -set remote exec-event-feature-packet -- Set use of remote protocol `exec-event-feature' (exec-event-feature) packet. -set remote exec-file -- Set the remote pathname for "run". -set remote fast-tracepoints-packet -- Set use of remote protocol `FastTracepoints' (fast-tracepoints) packet. -set remote fetch-register-packet, set remote p-packet -- Set use of remote protocol `p' (fetch-register) packet. -set remote fork-event-feature-packet -- Set use of remote protocol `fork-event-feature' (fork-event-feature) packet. -set remote get-thread-information-block-address-packet -- Set use of remote protocol `qGetTIBAddr' (get-thread-information-block-address) packet. -set remote get-thread-local-storage-address-packet -- Set use of remote protocol `qGetTLSAddr' (get-thread-local-storage-address) packet. -set remote hardware-breakpoint-limit -- Set the maximum number of target hardware breakpoints. -set remote hardware-breakpoint-packet -- Set use of remote protocol `Z1' (hardware-breakpoint) packet. -set remote hardware-watchpoint-length-limit -- Set the maximum length (in bytes) of a target hardware watchpoint. -set remote hardware-watchpoint-limit -- Set the maximum number of target hardware watchpoints. -set remote hostio-close-packet -- Set use of remote protocol `vFile:close' (hostio-close) packet. -set remote hostio-fstat-packet -- Set use of remote protocol `vFile:fstat' (hostio-fstat) packet. -set remote hostio-open-packet -- Set use of remote protocol `vFile:open' (hostio-open) packet. -set remote hostio-pread-packet -- Set use of remote protocol `vFile:pread' (hostio-pread) packet. -set remote hostio-pwrite-packet -- Set use of remote protocol `vFile:pwrite' (hostio-pwrite) packet. -set remote hostio-readlink-packet -- Set use of remote protocol `vFile:readlink' (hostio-readlink) packet. -set remote hostio-setfs-packet -- Set use of remote protocol `vFile:setfs' (hostio-setfs) packet. -set remote hostio-unlink-packet -- Set use of remote protocol `vFile:unlink' (hostio-unlink) packet. -set remote hwbreak-feature-packet -- Set use of remote protocol `hwbreak-feature' (hwbreak-feature) packet. -set remote install-in-trace-packet -- Set use of remote protocol `InstallInTrace' (install-in-trace) packet. -set remote interrupt-on-connect -- Set whether interrupt-sequence is sent to remote target when gdb connects to. -set remote interrupt-sequence -- Set interrupt sequence to remote target. -set remote kill-packet -- Set use of remote protocol `vKill' (kill) packet. -set remote library-info-packet -- Set use of remote protocol `qXfer:libraries:read' (library-info) packet. -set remote library-info-svr4-packet -- Set use of remote protocol `qXfer:libraries-svr4:read' (library-info-svr4) packet. -set remote memory-map-packet -- Set use of remote protocol `qXfer:memory-map:read' (memory-map) packet. -set remote memory-read-packet-size -- Set the maximum number of bytes per memory-read packet. -set remote memory-tagging-feature-packet -- Set use of remote protocol `memory-tagging-feature' (memory-tagging-feature) packet. -set remote memory-write-packet-size -- Set the maximum number of bytes per memory-write packet. -set remote multiprocess-feature-packet -- Set use of remote protocol `multiprocess-feature' (multiprocess-feature) packet. -set remote no-resumed-stop-reply-packet -- Set use of remote protocol `N stop reply' (no-resumed-stop-reply) packet. -set remote noack-packet -- Set use of remote protocol `QStartNoAckMode' (noack) packet. -set remote osdata-packet -- Set use of remote protocol `qXfer:osdata:read' (osdata) packet. -set remote pass-signals-packet -- Set use of remote protocol `QPassSignals' (pass-signals) packet. -set remote pid-to-exec-file-packet -- Set use of remote protocol `qXfer:exec-file:read' (pid-to-exec-file) packet. -set remote program-signals-packet -- Set use of remote protocol `QProgramSignals' (program-signals) packet. -set remote query-attached-packet -- Set use of remote protocol `qAttached' (query-attached) packet. -set remote read-aux-vector-packet -- Set use of remote protocol `qXfer:auxv:read' (read-aux-vector) packet. -set remote read-btrace-conf-packet -- Set use of remote protocol `qXfer:btrace-conf' (read-btrace-conf) packet. -set remote read-btrace-packet -- Set use of remote protocol `qXfer:btrace' (read-btrace) packet. -set remote read-fdpic-loadmap-packet -- Set use of remote protocol `qXfer:fdpic:read' (read-fdpic-loadmap) packet. -set remote read-sdata-object-packet -- Set use of remote protocol `qXfer:statictrace:read' (read-sdata-object) packet. -set remote read-siginfo-object-packet -- Set use of remote protocol `qXfer:siginfo:read' (read-siginfo-object) packet. -set remote read-watchpoint-packet -- Set use of remote protocol `Z3' (read-watchpoint) packet. -set remote reverse-continue-packet -- Set use of remote protocol `bc' (reverse-continue) packet. -set remote reverse-step-packet -- Set use of remote protocol `bs' (reverse-step) packet. -set remote run-packet -- Set use of remote protocol `vRun' (run) packet. -set remote search-memory-packet -- Set use of remote protocol `qSearch:memory' (search-memory) packet. -set remote set-register-packet, set remote P-packet -- Set use of remote protocol `P' (set-register) packet. -set remote set-working-dir-packet -- Set use of remote protocol `QSetWorkingDir' (set-working-dir) packet. -set remote software-breakpoint-packet -- Set use of remote protocol `Z0' (software-breakpoint) packet. -set remote startup-with-shell-packet -- Set use of remote protocol `QStartupWithShell' (startup-with-shell) packet. -set remote static-tracepoints-packet -- Set use of remote protocol `StaticTracepoints' (static-tracepoints) packet. -set remote supported-packets-packet -- Set use of remote protocol `qSupported' (supported-packets) packet. -set remote swbreak-feature-packet -- Set use of remote protocol `swbreak-feature' (swbreak-feature) packet. -set remote symbol-lookup-packet -- Set use of remote protocol `qSymbol' (symbol-lookup) packet. -set remote system-call-allowed -- Set if the host system(3) call is allowed for the target. -set remote target-features-packet -- Set use of remote protocol `qXfer:features:read' (target-features) packet. -set remote thread-events-packet -- Set use of remote protocol `QThreadEvents' (thread-events) packet. -set remote thread-options-packet -- Set use of remote protocol `QThreadOptions' (thread-options) packet. -set remote threads-packet -- Set use of remote protocol `qXfer:threads:read' (threads) packet. -set remote trace-buffer-size-packet -- Set use of remote protocol `QTBuffer:size' (trace-buffer-size) packet. -set remote trace-status-packet -- Set use of remote protocol `qTStatus' (trace-status) packet. -set remote traceframe-info-packet -- Set use of remote protocol `qXfer:traceframe-info:read' (traceframe-info) packet. -set remote unwind-info-block-packet -- Set use of remote protocol `qXfer:uib:read' (unwind-info-block) packet. -set remote verbose-resume-packet -- Set use of remote protocol `vCont' (verbose-resume) packet. -set remote verbose-resume-supported-packet -- Set use of remote protocol `vContSupported' (verbose-resume-supported) packet. -set remote vfork-event-feature-packet -- Set use of remote protocol `vfork-event-feature' (vfork-event-feature) packet. -set remote write-siginfo-object-packet -- Set use of remote protocol `qXfer:siginfo:write' (write-siginfo-object) packet. -set remote write-watchpoint-packet -- Set use of remote protocol `Z2' (write-watchpoint) packet. -set remoteaddresssize -- Set the maximum size of the address (in bits) in a memory packet. -set remotecache -- Set cache use for remote targets. -set remoteflow -- Set use of hardware flow control for remote serial I/O. -set remotelogbase -- Set numerical base for remote session logging. -set remotelogfile -- Set filename for remote session recording. -set remotetimeout -- Set timeout limit to wait for target to respond. -set remotewritesize -- Set the maximum number of bytes per memory write packet (deprecated). -set schedule-multiple -- Set mode for resuming threads of all processes. -set scheduler-locking -- Set mode for locking scheduler during execution. -set script-extension -- Set mode for script filename extension recognition. -set serial -- Set default serial/parallel port configuration. -set serial baud -- Set baud rate for remote serial I/O. -set serial parity -- Set parity for remote serial I/O. -set solib-search-path -- Set the search path for loading non-absolute shared library symbol files. -set source -- Generic command for setting how sources are handled. -set source open -- Set whether GDB should open source files. -set stack-cache -- Set cache use for stack access. -set startup-quietly -- Set whether GDB should start up quietly. -set startup-with-shell -- Set use of shell to start subprocesses. The default is on. -set step-mode -- Set mode of the step operation. -set stop-on-solib-events -- Set stopping for shared library events. -set struct-convention -- Set the convention for returning small structs. -set style -- Style-specific settings. -set style address, set style disassembler address -- Address display styling. -set style address background -- Set the background color for this property. -set style address foreground -- Set the foreground color for this property. -set style address intensity -- Set the display intensity for this property. -set style disassembler -- Style-specific settings for the disassembler. -set style disassembler comment -- Disassembler comment display styling. -set style disassembler comment background -- Set the background color for this property. -set style disassembler comment foreground -- Set the foreground color for this property. -set style disassembler comment intensity -- Set the display intensity for this property. -set style disassembler enabled -- Set whether disassembler output styling is enabled. -set style disassembler immediate -- Disassembler immediate display styling. -set style disassembler immediate background -- Set the background color for this property. -set style disassembler immediate foreground -- Set the foreground color for this property. -set style disassembler immediate intensity -- Set the display intensity for this property. -set style disassembler mnemonic -- Disassembler mnemonic display styling. -set style disassembler mnemonic background -- Set the background color for this property. -set style disassembler mnemonic foreground -- Set the foreground color for this property. -set style disassembler mnemonic intensity -- Set the display intensity for this property. -set style disassembler register -- Disassembler register display styling. -set style disassembler register background -- Set the background color for this property. -set style disassembler register foreground -- Set the foreground color for this property. -set style disassembler register intensity -- Set the display intensity for this property. -set style enabled -- Set whether CLI styling is enabled. -set style filename -- Filename display styling. -set style filename background -- Set the background color for this property. -set style filename foreground -- Set the foreground color for this property. -set style filename intensity -- Set the display intensity for this property. -set style function, set style disassembler symbol -- Function name display styling. -set style function background -- Set the background color for this property. -set style function foreground -- Set the foreground color for this property. -set style function intensity -- Set the display intensity for this property. -set style highlight -- Highlight display styling. -set style highlight background -- Set the background color for this property. -set style highlight foreground -- Set the foreground color for this property. -set style highlight intensity -- Set the display intensity for this property. -set style metadata -- Metadata display styling. -set style metadata background -- Set the background color for this property. -set style metadata foreground -- Set the foreground color for this property. -set style metadata intensity -- Set the display intensity for this property. -set style sources -- Set whether source code styling is enabled. -set style title -- Title display styling. -set style title background -- Set the background color for this property. -set style title foreground -- Set the foreground color for this property. -set style title intensity -- Set the display intensity for this property. -set style tui-active-border -- TUI active border display styling. -set style tui-active-border background -- Set the background color for this property. -set style tui-active-border foreground -- Set the foreground color for this property. -set style tui-border -- TUI border display styling. -set style tui-border background -- Set the background color for this property. -set style tui-border foreground -- Set the foreground color for this property. -set style tui-current-position -- Set whether to style text highlighted by the TUI's current position indicator. -set style variable -- Variable name display styling. -set style variable background -- Set the background color for this property. -set style variable foreground -- Set the foreground color for this property. -set style variable intensity -- Set the display intensity for this property. -set style version -- Version string display styling. -set style version background -- Set the background color for this property. -set style version foreground -- Set the foreground color for this property. -set style version intensity -- Set the display intensity for this property. -set substitute-path -- Add a substitution rule to rewrite the source directories. -set suppress-cli-notifications -- Set whether printing notifications on CLI is suppressed. -set sysroot, set solib-absolute-prefix -- Set an alternate system root. -set target-charset -- Set the target character set. -set target-file-system-kind -- Set assumed file system kind for target reported file names. -set target-wide-charset -- Set the target wide character set. -set tcp -- TCP protocol specific variables. -set tcp auto-retry -- Set auto-retry on socket connect. -set tcp connect-timeout -- Set timeout limit in seconds for socket connection. -set tdesc -- Set target description specific variables. -set tdesc filename -- Set the file to read for an XML target description. -set trace-buffer-size -- Set requested size of trace buffer. -set trace-commands -- Set tracing of GDB CLI commands. -set trace-notes -- Set notes string to use for current and future trace runs. -set trace-stop-notes -- Set notes string to use for future tstop commands. -set trace-user -- Set the user name to use for current and future trace runs. -set trust-readonly-sections -- Set mode for reading from readonly sections. -set tui -- TUI configuration variables. -set tui active-border-mode -- Set the attribute mode to use for the active TUI window border. -set tui border-kind -- Set the kind of border for TUI windows. -set tui border-mode -- Set the attribute mode to use for the TUI window borders. -set tui compact-source -- Set whether the TUI source window is compact. -set tui mouse-events -- Set whether TUI mode handles mouse clicks. -set tui tab-width -- Set the tab width, in characters, for the TUI. -set unwind-on-signal, set unwindonsignal -- Set unwinding of stack if a signal is received while in a call dummy. -set unwind-on-terminating-exception -- Set unwinding of stack if std::terminate is called while in call dummy. -set unwind-on-timeout -- Set unwinding of stack if a timeout occurs while in a call dummy. -set use-coredump-filter -- Set whether gcore should consider /proc/PID/coredump_filter. -set use-deprecated-index-sections -- Set whether to use deprecated gdb_index sections. -set variable, set var -- Evaluate expression EXP and assign result to variable VAR. -set verbose -- Set verbosity. -set watchdog -- Set watchdog timer. -set width -- Set number of characters where GDB should wrap lines of its output. -set write -- Set writing into executable and core files. -undisplay -- Cancel some expressions to be displayed when program stops. -whatis -- Print data type of expression EXP. -with, w -- Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING. -x -- Examine memory: x/FMT ADDRESS. - -Command class: files - -add-symbol-file -- Load symbols from FILE, assuming FILE has been dynamically loaded. -add-symbol-file-from-memory -- Load the symbols out of memory from a dynamically loaded object file. -cd -- Set working directory to DIR for debugger. -core-file -- Use FILE as core dump for examining memory and registers. -directory -- Add directory DIR to beginning of search path for source files. -edit -- Edit specified file or function. -exec-file -- Use FILE as program for getting contents of pure memory. -file -- Use FILE as program to be debugged. -forward-search, fo, search -- Search for regular expression (see regex(3)) from last line listed. -generate-core-file, gcore -- Save a core file with the current state of the debugged process. -list, l -- List specified function or line. -load -- Dynamically load FILE into the running program. -nosharedlibrary -- Unload all shared object library symbols. -path -- Add directory DIR(s) to beginning of search path for object files. -pwd -- Print working directory. -remote -- Manipulate files on the remote system. -remote delete -- Delete a remote file. -remote get -- Copy a remote file to the local system. -remote put -- Copy a local file to the remote system. -remove-symbol-file -- Remove a symbol file added via the add-symbol-file command. -reverse-search, rev -- Search backward for regular expression (see regex(3)) from last line listed. -section -- Change the base address of section SECTION of the exec file to ADDR. -sharedlibrary -- Load shared object library symbols for files matching REGEXP. -symbol-file -- Load symbol table from executable file FILE. - -Command class: internals - -maintenance, mt -- Commands for use by GDB maintainers. -maintenance agent -- Translate an expression into remote agent bytecode for tracing. -maintenance agent-eval -- Translate an expression into remote agent bytecode for evaluation. -maintenance agent-printf -- Translate an expression into remote agent bytecode for evaluation and display the bytecodes. -maintenance btrace -- Branch tracing maintenance commands. -maintenance btrace clear -- Clears the branch tracing data. -maintenance btrace clear-packet-history -- Clears the branch tracing packet history. -maintenance btrace packet-history -- Print the raw branch tracing data. -maintenance check -- Commands for checking internal gdb state. -maintenance check libthread-db -- Run integrity checks on the current inferior's libthread_db. -maintenance check xml-descriptions -- Check equality of GDB target descriptions and XML created descriptions. -maintenance check-psymtabs -- Check consistency of currently expanded psymtabs versus symtabs. -maintenance check-symtabs -- Check consistency of currently expanded symtabs. -maintenance cplus, maintenance cp -- C++ maintenance commands. -maintenance cplus first_component -- Print the first class/namespace component of NAME. -maintenance demangler-warning -- Give GDB a demangler warning. -maintenance deprecate -- Deprecate a command (for testing purposes). -maintenance dump-me -- Get fatal error; make debugger dump its core. -maintenance expand-symtabs -- Expand symbol tables. -maintenance flush -- Maintenance command for flushing GDB internal caches. -maintenance flush dcache -- Force gdb to flush its target memory data cache. -maintenance flush register-cache -- Force gdb to flush its register and frame cache. -maintenance flush source-cache -- Force gdb to flush its source code cache. -maintenance flush symbol-cache -- Flush the symbol cache for each program space. -maintenance ignore-probes -- Ignore probes. -maintenance info, maintenance i -- Commands for showing internal info about the program being debugged. -maintenance info bfds -- List the BFDs that are currently open. -maintenance info breakpoints -- Status of all breakpoints, or breakpoint number NUMBER. -maintenance info btrace -- Info about branch tracing data. -maintenance info frame-unwinders -- List the frame unwinders currently in effect, starting with the highest priority. -maintenance info jit -- Print information about JIT-ed code objects. -maintenance info line-table -- List the contents of all line tables, from all symbol tables. -maintenance info linux-lwps -- List the Linux LWPS. -maintenance info program-spaces -- Info about currently known program spaces. -maintenance info psymtabs -- List the partial symbol tables for all object files. -maintenance info screen -- Show screen characteristics. -maintenance info sections -- List the BFD sections of the exec and core files. -maintenance info selftests -- List the registered selftests. -maintenance info symtabs -- List the full symbol tables for all object files. -maintenance info target-sections -- List GDB's internal section table. -maintenance internal-error -- Give GDB an internal error. -maintenance internal-warning -- Give GDB an internal warning. -maintenance packet -- Send an arbitrary packet to a remote target. -maintenance print -- Maintenance command for printing GDB internal state. -maintenance print architecture -- Print the internal architecture configuration. -maintenance print c-tdesc -- Print the current target description as a C source file. -maintenance print cooked-registers -- Print the internal register configuration including cooked values. -maintenance print core-file-backed-mappings -- Print core file's file-backed mappings. -maintenance print dummy-frames -- Print the contents of the internal dummy-frame stack. -maintenance print frame-id -- Print the current frame-id. -maintenance print msymbols -- Print dump of current minimal symbol definitions. -maintenance print objfiles -- Print dump of current object file definitions. -maintenance print psymbols -- Print dump of current partial symbol definitions. -maintenance print raw-registers -- Print the internal register configuration including raw values. -maintenance print record-instruction -- Print a recorded instruction. -maintenance print reggroups -- Print the internal register group names. -maintenance print register-groups -- Print the internal register configuration including each register's group. -maintenance print registers -- Print the internal register configuration. -maintenance print remote-registers -- Print the internal register configuration including remote register number and g/G packets offset. -maintenance print statistics -- Print statistics about internal gdb state. -maintenance print symbol-cache -- Dump the symbol cache for each program space. -maintenance print symbol-cache-statistics -- Print symbol cache statistics for each program space. -maintenance print symbols -- Print dump of current symbol definitions. -maintenance print target-stack -- Print the name of each layer of the internal target stack. -maintenance print type -- Print a type chain for a given symbol. -maintenance print user-registers -- List the names of the current user registers. -maintenance print xml-tdesc -- Print the current target description as an XML file. -maintenance selftest -- Run gdb's unit tests. -maintenance set -- Set GDB internal variables used by the GDB maintainer. -maintenance set ada -- Set Ada maintenance-related variables. -maintenance set ada ignore-descriptive-types -- Set whether descriptive types generated by GNAT should be ignored. -maintenance set backtrace-on-fatal-signal -- Set whether to produce a backtrace if GDB receives a fatal signal. -maintenance set bfd-sharing -- Set whether gdb will share bfds that appear to be the same file. -maintenance set btrace -- Set branch tracing specific variables. -maintenance set btrace pt -- Set Intel Processor Trace specific variables. -maintenance set btrace pt skip-pad -- Set whether PAD packets should be skipped in the btrace packet history. -maintenance set catch-demangler-crashes -- Set whether to attempt to catch demangler crashes. -maintenance set check-libthread-db -- Set whether to check libthread_db at load time. -maintenance set debuginfod -- Set debuginfod specific variables. -maintenance set debuginfod download-sections -- Set whether debuginfod may download individual ELF/DWARF sections. -maintenance set demangler-warning -- Configure what GDB does when demangler-warning is detected. -maintenance set demangler-warning quit -- Set whether GDB should quit when an demangler-warning is detected. -maintenance set dwarf -- Set DWARF specific variables. -maintenance set dwarf always-disassemble -- Set whether `info address' always disassembles DWARF expressions. -maintenance set dwarf max-cache-age -- Set the upper bound on the age of cached DWARF compilation units. -maintenance set dwarf synchronous -- Set whether DWARF is read synchronously. -maintenance set dwarf unwinders -- Set whether the DWARF stack frame unwinders are used. -maintenance set gnu-source-highlight -- Set gnu-source-highlight specific variables. -maintenance set gnu-source-highlight enabled -- Set whether the GNU Source Highlight library should be used. -maintenance set ignore-prologue-end-flag -- Set if the PROLOGUE-END flag is ignored. -maintenance set internal-error -- Configure what GDB does when internal-error is detected. -maintenance set internal-error backtrace -- Set whether GDB should print a backtrace of GDB when internal-error is detected. -maintenance set internal-error corefile -- Set whether GDB should create a core file of GDB when internal-error is detected. -maintenance set internal-error quit -- Set whether GDB should quit when an internal-error is detected. -maintenance set internal-warning -- Configure what GDB does when internal-warning is detected. -maintenance set internal-warning backtrace -- Set whether GDB should print a backtrace of GDB when internal-warning is detected. -maintenance set internal-warning corefile -- Set whether GDB should create a core file of GDB when internal-warning is detected. -maintenance set internal-warning quit -- Set whether GDB should quit when an internal-warning is detected. -maintenance set libopcodes-styling -- Set libopcodes-styling specific variables. -maintenance set libopcodes-styling enabled -- Set whether the libopcodes styling support should be used. -maintenance set per-command -- Per-command statistics settings. -maintenance set per-command space -- Set whether to display per-command space usage. -maintenance set per-command symtab -- Set whether to display per-command symtab statistics. -maintenance set per-command time -- Set whether to display per-command execution time. -maintenance set profile -- Set internal profiling. -maintenance set selftest -- Self tests-related settings. -maintenance set selftest verbose -- Set whether selftests run in verbose mode. -maintenance set show-debug-regs -- Set whether to show variables that mirror the x86 debug registers. -maintenance set symbol-cache-size -- Set the size of the symbol cache. -maintenance set target-async -- Set whether gdb controls the inferior in asynchronous mode. -maintenance set target-non-stop -- Set whether gdb always controls the inferior in non-stop mode. -maintenance set test-settings -- Set GDB internal variables used for set/show command infrastructure testing. -maintenance set test-settings auto-boolean -- command used for internal testing. -maintenance set test-settings boolean -- command used for internal testing. -maintenance set test-settings enum -- command used for internal testing. -maintenance set test-settings filename -- command used for internal testing. -maintenance set test-settings integer -- command used for internal testing. -maintenance set test-settings optional-filename -- command used for internal testing. -maintenance set test-settings string -- command used for internal testing. -maintenance set test-settings string-noescape -- command used for internal testing. -maintenance set test-settings uinteger -- command used for internal testing. -maintenance set test-settings zinteger -- command used for internal testing. -maintenance set test-settings zuinteger -- command used for internal testing. -maintenance set test-settings zuinteger-unlimited -- command used for internal testing. -maintenance set tui-left-margin-verbose -- Set whether the left margin should use '_' and '0' instead of spaces. -maintenance set tui-resize-message -- Set TUI resize messaging. -maintenance set worker-threads -- Set the number of worker threads GDB can use. -maintenance show -- Show GDB internal variables used by the GDB maintainer. -maintenance show ada -- Show Ada maintenance-related variables. -maintenance show ada ignore-descriptive-types -- Show whether descriptive types generated by GNAT should be ignored. -maintenance show backtrace-on-fatal-signal -- Show whether GDB will produce a backtrace if it receives a fatal signal. -maintenance show bfd-sharing -- Show whether gdb will share bfds that appear to be the same file. -maintenance show btrace -- Show branch tracing specific variables. -maintenance show btrace pt -- Show Intel Processor Trace specific variables. -maintenance show btrace pt skip-pad -- Show whether PAD packets should be skipped in the btrace packet history. -maintenance show catch-demangler-crashes -- Show whether to attempt to catch demangler crashes. -maintenance show check-libthread-db -- Show whether to check libthread_db at load time. -maintenance show debuginfod -- Show debuginfod specific variables. -maintenance show debuginfod download-sections -- Show whether debuginfod may download individual ELF/DWARF sections. -maintenance show demangler-warning -- Show what GDB does when demangler-warning is detected. -maintenance show demangler-warning quit -- Show whether GDB will quit when an demangler-warning is detected. -maintenance show dwarf -- Show DWARF specific variables. -maintenance show dwarf always-disassemble -- Show whether `info address' always disassembles DWARF expressions. -maintenance show dwarf max-cache-age -- Show the upper bound on the age of cached DWARF compilation units. -maintenance show dwarf synchronous -- Show whether DWARF is read synchronously. -maintenance show dwarf unwinders -- Show whether the DWARF stack frame unwinders are used. -maintenance show gnu-source-highlight -- Show gnu-source-highlight specific variables. -maintenance show gnu-source-highlight enabled -- Show whether the GNU Source Highlight library is being used. -maintenance show ignore-prologue-end-flag -- Show if the PROLOGUE-END flag is ignored. -maintenance show internal-error -- Show what GDB does when internal-error is detected. -maintenance show internal-error backtrace -- Show whether GDB will print a backtrace of GDB when internal-error is detected. -maintenance show internal-error corefile -- Show whether GDB will create a core file of GDB when internal-error is detected. -maintenance show internal-error quit -- Show whether GDB will quit when an internal-error is detected. -maintenance show internal-warning -- Show what GDB does when internal-warning is detected. -maintenance show internal-warning backtrace -- Show whether GDB will print a backtrace of GDB when internal-warning is detected. -maintenance show internal-warning corefile -- Show whether GDB will create a core file of GDB when internal-warning is detected. -maintenance show internal-warning quit -- Show whether GDB will quit when an internal-warning is detected. -maintenance show libopcodes-styling -- Show libopcodes-styling specific variables. -maintenance show libopcodes-styling enabled -- Show whether the libopcodes styling support should be used. -maintenance show per-command -- Show per-command statistics settings. -maintenance show per-command space -- Show whether to display per-command space usage. -maintenance show per-command symtab -- Show whether to display per-command symtab statistics. -maintenance show per-command time -- Show whether to display per-command execution time. -maintenance show profile -- Show internal profiling. -maintenance show selftest -- Self tests-related settings. -maintenance show selftest verbose -- Show whether selftests run in verbose mode. -maintenance show show-debug-regs -- Show whether to show variables that mirror the x86 debug registers. -maintenance show symbol-cache-size -- Show the size of the symbol cache. -maintenance show target-async -- Show whether gdb controls the inferior in asynchronous mode. -maintenance show target-non-stop -- Show whether gdb always controls the inferior in non-stop mode. -maintenance show test-options-completion-result -- Show maintenance test-options completion result. -maintenance show test-settings -- Show GDB internal variables used for set/show command infrastructure testing. -maintenance show test-settings auto-boolean -- command used for internal testing. -maintenance show test-settings boolean -- command used for internal testing. -maintenance show test-settings enum -- command used for internal testing. -maintenance show test-settings filename -- command used for internal testing. -maintenance show test-settings integer -- command used for internal testing. -maintenance show test-settings optional-filename -- command used for internal testing. -maintenance show test-settings string -- command used for internal testing. -maintenance show test-settings string-noescape -- command used for internal testing. -maintenance show test-settings uinteger -- command used for internal testing. -maintenance show test-settings zinteger -- command used for internal testing. -maintenance show test-settings zuinteger -- command used for internal testing. -maintenance show test-settings zuinteger-unlimited -- command used for internal testing. -maintenance show tui-left-margin-verbose -- Show whether the left margin should use '_' and '0' instead of spaces. -maintenance show tui-resize-message -- Show TUI resize messaging. -maintenance show worker-threads -- Show the number of worker threads GDB can use. -maintenance space -- Set the display of space usage. -maintenance test-options -- Generic command for testing the options infrastructure. -maintenance test-options require-delimiter -- Command used for testing options processing. -maintenance test-options unknown-is-error -- Command used for testing options processing. -maintenance test-options unknown-is-operand -- Command used for testing options processing. -maintenance time -- Set the display of time usage. -maintenance translate-address -- Translate a section name and address to a symbol. -maintenance undeprecate -- Undeprecate a command (for testing purposes). -maintenance wait-for-index-cache -- Wait until all pending writes to the index cache have completed. -maintenance with -- Like "with", but works with "maintenance set" variables. - -Command class: obscure - -checkpoint -- Fork a duplicate process (experimental). -compare-sections -- Compare section data on target to the exec file. -compile, expression -- Command to compile source code and inject it into the inferior. -compile code -- Compile, inject, and execute code. -compile file -- Evaluate a file containing source code. -compile print -- Evaluate EXPR by using the compiler and print result. -complete -- List the completions for the rest of the line as a command. -guile, gu -- Evaluate a Guile expression. -guile-repl, gr -- Start a Guile interactive prompt. -monitor -- Send a command to the remote monitor (remote targets only). -python, py -- Evaluate a Python command. -python-interactive, pi -- Start an interactive Python prompt. -record, rec -- Start recording. -record btrace, record b -- Start branch trace recording. -record btrace bts, record bts -- Start branch trace recording in Branch Trace Store (BTS) format. -record btrace pt, record pt -- Start branch trace recording in Intel Processor Trace format. -record delete, record del, record d -- Delete the rest of execution log and start recording it anew. -record full -- Start full execution recording. -record full restore -- Restore the execution log from a file. -record function-call-history -- Prints the execution history at function granularity. -record goto -- Restore the program to its state at instruction number N. -record goto begin, record goto start -- Go to the beginning of the execution log. -record goto end -- Go to the end of the execution log. -record instruction-history -- Print disassembled instructions stored in the execution log. -record save -- Save the execution log to a file. -record stop, record s -- Stop the record/replay target. -restart -- Restore program context from a checkpoint. -stop -- There is no `stop' command, but you can set a hook on `stop'. - -Command class: running - -advance -- Continue the program up to the given location (same form as args for break command). -attach -- Attach to a process or file outside of GDB. -continue, fg, c -- Continue program being debugged, after signal or breakpoint. -detach -- Detach a process or file previously attached. -detach checkpoint -- Detach from a checkpoint (experimental). -detach inferiors -- Detach from inferior ID (or list of IDS). -disconnect -- Disconnect from a target. -finish, fin -- Execute until selected stack frame returns. -handle -- Specify how to handle signals. -inferior -- Use this command to switch between inferiors. -interrupt -- Interrupt the execution of the debugged program. -jump, j -- Continue program being debugged at specified line or address. -kill -- Kill execution of program being debugged. -kill inferiors -- Kill inferior ID (or list of IDs). -next, n -- Step program, proceeding through subroutine calls. -nexti, ni -- Step one instruction, but proceed through subroutine calls. -queue-signal -- Queue a signal to be delivered to the current thread when it is resumed. -reverse-continue, rc -- Continue program being debugged but run it in reverse. -reverse-finish -- Execute backward until just before selected stack frame is called. -reverse-next, rn -- Step program backward, proceeding through subroutine calls. -reverse-nexti, rni -- Step backward one instruction, but proceed through called subroutines. -reverse-step, rs -- Step program backward until it reaches the beginning of another source line. -reverse-stepi, rsi -- Step backward exactly one instruction. -run, r -- Start debugged program. -signal -- Continue program with the specified signal. -start -- Start the debugged program stopping at the beginning of the main procedure. -starti -- Start the debugged program stopping at the first instruction. -step, s -- Step program until it reaches a different source line. -stepi, si -- Step one instruction exactly. -taas -- Apply a command to all threads (ignoring errors and empty output). -target -- Connect to a target machine or process. -target core -- Use a core file as a target. -target ctf -- (Use a CTF directory as a target. -target exec -- Use an executable file as a target. -target extended-remote -- Use a remote computer via a serial line, using a gdb-specific protocol. -target native -- Native process (started by the "run" command). -target record-btrace -- Collect control-flow trace and provide the execution history. -target record-core -- Log program while executing and replay execution from log. -target record-full -- Log program while executing and replay execution from log. -target remote -- Use a remote computer via a serial line, using a gdb-specific protocol. -target tfile -- Use a trace file as a target. -task -- Use this command to switch between Ada tasks. -task apply -- Apply a command to a list of tasks. -task apply all -- Apply a command to all tasks in the current inferior. -tfaas -- Apply a command to all frames of all threads (ignoring errors and empty output). -thread, t -- Use this command to switch between threads. -thread apply -- Apply a command to a list of threads. -thread apply all -- Apply a command to all threads. -thread find -- Find threads that match a regular expression. -thread name -- Set the current thread's name. -until, u -- Execute until past the current line or past a LOCATION. - -Command class: stack - -backtrace, where, bt -- Print backtrace of all stack frames, or innermost COUNT frames. -down, dow, do -- Select and print stack frame called by this one. -faas -- Apply a command to all frames (ignoring errors and empty output). -frame, f -- Select and print a stack frame. -frame address -- Select and print a stack frame by stack address. -frame apply -- Apply a command to a number of frames. -frame apply all -- Apply a command to all frames. -frame apply level -- Apply a command to a list of frames. -frame function -- Select and print a stack frame by function name. -frame level -- Select and print a stack frame by level. -frame view -- View a stack frame that might be outside the current backtrace. -return -- Make selected stack frame return to its caller. -select-frame -- Select a stack frame without printing anything. -select-frame address -- Select a stack frame by stack address. -select-frame function -- Select a stack frame by function name. -select-frame level -- Select a stack frame by level. -select-frame view -- Select a stack frame that might be outside the current backtrace. -up -- Select and print stack frame that called this one. - -Command class: status - -info, inf, i -- Generic command for showing things about the program being debugged. -info address -- Describe where symbol SYM is stored. -info all-registers -- List of all registers and their contents, for selected stack frame. -info args -- All argument variables of current stack frame or those matching REGEXPs. -info auto-load -- Print current status of auto-loaded files. -info auto-load gdb-scripts -- Print the list of automatically loaded sequences of commands. -info auto-load libthread-db -- Print the list of loaded inferior specific libthread_db. -info auto-load local-gdbinit -- Print whether current directory .gdbinit file has been loaded. -info auto-load python-scripts -- Print the list of automatically loaded Python scripts. -info auxv -- Display the inferior's auxiliary vector. -info bookmarks -- Status of user-settable bookmarks. -info breakpoints, info b -- Status of specified breakpoints (all user-settable breakpoints if no argument). -info checkpoints -- IDs of currently known checkpoints. -info classes -- All Objective-C classes, or those matching REGEXP. -info common -- Print out the values contained in a Fortran COMMON block. -info connections -- Target connections in use. -info copying -- Conditions for redistributing copies of GDB. -info dcache -- Print information on the dcache performance. -info display -- Expressions to display when program stops, with code numbers. -info exceptions -- List all Ada exception names. -info extensions -- All filename extensions associated with a source language. -info files -- Names of targets and files being debugged. -info float -- Print the status of the floating point unit. -info frame, info f -- All about the selected stack frame. -info frame address -- Print information about a stack frame selected by stack address. -info frame function -- Print information about a stack frame selected by function name. -info frame level -- Print information about a stack frame selected by level. -info frame view -- Print information about a stack frame outside the current backtrace. -info frame-filter -- List all registered Python frame-filters. -info functions -- All function names or those matching REGEXPs. -info guile, info gu -- Prefix command for Guile info displays. -info inferiors -- Print a list of inferiors being managed. -info line -- Core addresses of the code for a source line. -info locals -- All local variables of current stack frame or those matching REGEXPs. -info macro -- Show the definition of MACRO, and it's source location. -info macros -- Show the definitions of all macros at LINESPEC, or the current source location. -info main -- Get main symbol to identify entry point into program. -info mem -- Memory region attributes. -info missing-debug-handlers -- GDB command to list missing debug handlers. -info module -- Print information about modules. -info module functions -- Display functions arranged by modules. -info module variables -- Display variables arranged by modules. -info modules -- All module names, or those matching REGEXP. -info os -- Show OS data ARG. -info pretty-printer -- GDB command to list all registered pretty-printers. -info probes -- Show available static probes. -info probes all -- Show information about all type of probes. -info probes dtrace -- Show information about DTrace static probes. -info probes stap -- Show information about SystemTap static probes. -info proc -- Show additional information about a process. -info proc all -- List all available info about the specified process. -info proc cmdline -- List command line arguments of the specified process. -info proc cwd -- List current working directory of the specified process. -info proc exe -- List absolute filename for executable of the specified process. -info proc files -- List files opened by the specified process. -info proc mappings -- List memory regions mapped by the specified process. -info proc stat -- List process info from /proc/PID/stat. -info proc status -- List process info from /proc/PID/status. -info program -- Execution status of the program. -info record, info rec -- Info record options. -info registers, info r -- List of integer registers and their contents, for selected stack frame. -info scope -- List the variables local to a scope. -info selectors -- All Objective-C selectors, or those matching REGEXP. -info sharedlibrary, info dll -- Status of loaded shared object libraries. -info signals, info handle -- What debugger does when program gets various signals. -info skip -- Display the status of skips. -info source -- Information about the current source file. -info sources -- All source files in the program or those matching REGEXP. -info stack, info s -- Backtrace of the stack, or innermost COUNT frames. -info static-tracepoint-markers -- List target static tracepoints markers. -info symbol -- Describe what symbol is at location ADDR. -info target -- Names of targets and files being debugged. -info tasks -- Provide information about all known Ada tasks. -info terminal -- Print inferior's saved terminal status. -info threads -- Display currently known threads. -info tracepoints, info tp -- Status of specified tracepoints (all tracepoints if no argument). -info tvariables -- Status of trace state variables and their values. -info type-printers -- GDB command to list all registered type-printers. -info types -- All type names, or those matching REGEXP. -info unwinder -- GDB command to list unwinders. -info variables -- All global and static variable names or those matching REGEXPs. -info vector -- Print the status of the vector unit. -info vtbl -- Show the virtual function table for a C++ object. -info warranty -- Various kinds of warranty you do not have. -info watchpoints -- Status of specified watchpoints (all watchpoints if no argument). -info win -- List of all displayed windows. -info xmethod -- GDB command to list registered xmethod matchers. -macro -- Prefix for commands dealing with C preprocessor macros. -macro define -- Define a new C/C++ preprocessor macro. -macro expand, macro exp -- Fully expand any C/C++ preprocessor macro invocations in EXPRESSION. -macro expand-once, macro exp1 -- Expand C/C++ preprocessor macro invocations appearing directly in EXPRESSION. -macro list -- List all the macros defined using the `macro define' command. -macro undef -- Remove the definition of the C/C++ preprocessor macro with the given name. -show, info set -- Generic command for showing things about the debugger. -show ada -- Generic command for showing Ada-specific settings. -show ada print-signatures -- Show whether the output of formal and return types for functions in the overloads selection menu is activated. -show ada source-charset -- Show the Ada source character set. -show ada trust-PAD-over-XVS -- Show whether an optimization trusting PAD types over XVS types is activated. -show agent -- Show debugger's willingness to use agent as a helper. -show always-read-ctf -- Show whether CTF is always read. -show annotate -- Show annotation_level. -show architecture -- Show architecture of target. -show args -- Show argument list to give program being debugged when it is started. -show auto-connect-native-target -- Show whether GDB may automatically connect to the native target. -show auto-load -- Show auto-loading specific settings. -show auto-load gdb-scripts -- Show whether auto-loading of canned sequences of commands scripts is enabled. -show auto-load libthread-db -- Show whether auto-loading inferior specific libthread_db is enabled. -show auto-load local-gdbinit -- Show whether auto-loading .gdbinit script in current directory is enabled. -show auto-load python-scripts -- Show the debugger's behaviour regarding auto-loaded Python scripts. -show auto-load safe-path -- Show the list of files and directories that are safe for auto-loading. -show auto-load scripts-directory -- Show the list of directories from which to load auto-loaded scripts. -show auto-solib-add -- Show autoloading of shared library symbols. -show backtrace -- Show backtrace specific variables. -show backtrace limit -- Show the upper bound on the number of backtrace levels. -show backtrace past-entry -- Show whether backtraces should continue past the entry point of a program. -show backtrace past-main -- Show whether backtraces should continue past "main". -show basenames-may-differ -- Show whether a source file may have multiple base names. -show breakpoint -- Breakpoint specific settings. -show breakpoint always-inserted -- Show mode for inserting breakpoints. -show breakpoint auto-hw -- Show automatic usage of hardware breakpoints. -show breakpoint condition-evaluation -- Show mode of breakpoint condition evaluation. -show breakpoint pending -- Show debugger's behavior regarding pending breakpoints. -show can-use-hw-watchpoints -- Show debugger's willingness to use watchpoint hardware. -show case-sensitive -- Show case sensitivity in name search (on/off/auto). -show charset -- Show the host and target character sets. -show check, show ch, show c -- Show the status of the type/range checker. -show check range -- Show range checking (on/warn/off/auto). -show check type -- Show strict type checking. -show circular-trace-buffer -- Show target's use of circular trace buffer. -show code-cache -- Show cache use for code segment access. -show coerce-float-to-double -- Show coercion of floats to doubles when calling functions. -show commands -- Show the history of commands you typed. -show compile-args -- Show compile command GCC command-line arguments. -show compile-gcc -- Show compile command GCC driver filename. -show complaints -- Show max number of complaints about incorrect symbols. -show configuration -- Show how GDB was configured at build time. -show confirm -- Show whether to confirm potentially dangerous operations. -show convenience, show conv -- Debugger convenience ("$foo") variables and functions. -show copying -- Conditions for redistributing copies of GDB. -show cp-abi -- Show the ABI used for inspecting C++ objects. -show cwd -- Show the current working directory that is used when the inferior is started. -show data-directory -- Show GDB's data directory. -show dcache -- Show dcache settings. -show dcache line-size -- Show dcache line size. -show dcache size -- Show number of dcache lines. -show debug -- Generic command for showing gdb debugging flags. -show debug arch -- Show architecture debugging. -show debug auto-load -- Show auto-load verifications debugging. -show debug bfd-cache -- Show bfd cache debugging. -show debug breakpoint -- Show breakpoint location debugging. -show debug check-physname -- Show cross-checking of "physname" code against demangler. -show debug coff-pe-read -- Show coff PE read debugging. -show debug compile -- Show compile command debugging. -show debug compile-cplus-scopes -- Show debugging of C++ compile scopes. -show debug compile-cplus-types -- Show debugging of C++ compile type conversion. -show debug displaced -- Show displaced stepping debugging. -show debug dwarf-die -- Show debugging of the DWARF DIE reader. -show debug dwarf-line -- Show debugging of the dwarf line reader. -show debug dwarf-read -- Show debugging of the DWARF reader. -show debug entry-values -- Show entry values and tail call frames debugging. -show debug event-loop -- Show event-loop debugging. -show debug expression -- Show expression debugging. -show debug fortran-array-slicing -- Show debugging of Fortran array slicing. -show debug frame -- Show frame debugging. -show debug index-cache -- Show display of index-cache debug messages. -show debug infcall -- Show inferior call debugging. -show debug infrun -- Show inferior debugging. -show debug jit -- Show JIT debugging. -show debug libthread-db -- Show libthread-db debugging. -show debug linux-namespaces -- Show debugging of GNU/Linux namespaces module. -show debug linux-nat -- Show debugging of GNU/Linux native target. -show debug notification -- Show debugging of async remote notification. -show debug observer -- Show observer debugging. -show debug overload -- Show debugging of C++ overloading. -show debug parser -- Show parser debugging. -show debug py-breakpoint -- Show Python breakpoint debugging. -show debug py-micmd -- Show Python micmd debugging. -show debug py-unwind -- Show Python unwinder debugging. -show debug record -- Show debugging of record/replay feature. -show debug remote -- Show debugging of remote protocol. -show debug remote-packet-max-chars -- Show the maximum number of characters to display for each remote packet. -show debug separate-debug-file -- Show printing of separate debug info file search debug. -show debug serial -- Show serial debugging. -show debug skip -- Show whether the debug output about skipping files and functions is printed. -show debug solib -- Show solib debugging. -show debug stap-expression -- Show SystemTap expression debugging. -show debug symbol-lookup -- Show debugging of symbol lookup. -show debug symfile -- Show debugging of the symfile functions. -show debug symtab-create -- Show debugging of symbol table creation. -show debug target -- Show target debugging. -show debug threads -- Show thread debugging. -show debug timestamp -- Show timestamping of debugging messages. -show debug tui -- Show tui debugging. -show debug varobj -- Show varobj debugging. -show debug xml -- Show XML parser debugging. -show debug-file-directory -- Show the directories where separate debug symbols are searched for. -show debuginfod -- Show debuginfod options. -show debuginfod enabled -- Show whether to use debuginfod. -show debuginfod urls -- Show the list of debuginfod server URLs. -show debuginfod verbose -- Show debuginfod debugging. -show default-collect -- Show the list of expressions to collect by default. -show demangle-style -- Show the current C++ demangling style. -show detach-on-fork -- Show whether gdb will detach the child of a fork. -show direct-call-timeout -- Show the timeout, for direct calls to inferior function calls. -show directories -- Show the search path for finding source files. -show disable-randomization -- Show disabling of debuggee's virtual address space randomization. -show disassemble-next-line -- Show whether to disassemble next source line or insn when execution stops. -show disassembler-options -- Show the disassembler options. -show disassembly-flavor -- Show the disassembly flavor. -show disconnected-dprintf -- Show whether dprintf continues after GDB disconnects. -show disconnected-tracing -- Show whether tracing continues after GDB disconnects. -show displaced-stepping -- Show debugger's willingness to use displaced stepping. -show dprintf-channel -- Show the channel to use for dynamic printf. -show dprintf-function -- Show the function to use for dynamic printf. -show dprintf-style -- Show the style of usage for dynamic printf. -show dump-excluded-mappings -- Show whether gcore should dump mappings marked with the VM_DONTDUMP flag. -show editing -- Show editing of command lines as they are typed. -show endian -- Show endianness of target. -show environment -- The environment to give the program, or one variable's value. -show exec-direction -- Show direction of execution (forward/reverse). -show exec-done-display -- Show notification of completion for asynchronous execution commands. -show exec-file-mismatch -- Show exec-file-mismatch handling (ask|warn|off). -show exec-wrapper -- Show the wrapper for running programs. -show extended-prompt -- Show the extended prompt. -show extension-language -- Show mapping between filename extension and source language. -show filename-display -- Show how to display filenames. -show follow-exec-mode -- Show debugger response to a program call of exec. -show follow-fork-mode -- Show debugger response to a program call of fork or vfork. -show fortran -- Generic command for showing Fortran-specific settings. -show fortran repack-array-slices -- Show whether non-contiguous array slices are repacked. -show frame-filter -- Prefix command for 'show' frame-filter related operations. -show frame-filter priority -- GDB command to show the priority of the specified frame-filter. -show gnutarget -- Show the current BFD target. -show guile, show gu -- Prefix command for Guile preference settings. -show guile print-stack -- Show the mode of Guile exception printing on error. -show height -- Show number of lines in a page for GDB output pagination. -show history -- Generic command for showing command history parameters. -show history expansion -- Show history expansion on command input. -show history filename -- Show the filename in which to record the command history. -show history remove-duplicates -- Show how far back in history to look for and remove duplicate entries. -show history save -- Show saving of the history record on exit. -show history size -- Show the size of the command history. -show host-charset -- Show the host character set. -show index-cache -- Show index-cache options. -show index-cache directory -- Show the directory of the index cache. -show index-cache enabled -- Show whether the index cache is enabled. -show index-cache stats -- Show some stats about the index cache. -show indirect-call-timeout -- Show the timeout, for indirect calls to inferior function calls. -show inferior-tty -- Show terminal for future runs of program being debugged. -show input-radix -- Show default input radix for entering numbers. -show interactive-mode -- Show whether GDB's standard input is a terminal. -show language -- Show the current source language. -show libthread-db-search-path -- Show the current search path or libthread_db. -show listsize -- Show number of source lines gdb will list by default. -show logging -- Show logging options. -show logging debugredirect -- Show the logging debug output mode. -show logging enabled -- Show whether logging is enabled. -show logging file -- Show the current logfile. -show logging overwrite -- Show whether logging overwrites or appends to the log file. -show logging redirect -- Show the logging output mode. -show max-completions -- Show maximum number of completion candidates. -show max-user-call-depth -- Show the max call depth for non-python/scheme user-defined commands. -show max-value-size -- Show maximum sized value gdb will load from the inferior. -show may-call-functions -- Show permission to call functions in the program. -show may-insert-breakpoints -- Show permission to insert breakpoints in the target. -show may-insert-fast-tracepoints -- Show permission to insert fast tracepoints in the target. -show may-insert-tracepoints -- Show permission to insert tracepoints in the target. -show may-interrupt -- Show permission to interrupt or signal the target. -show may-write-memory -- Show permission to write into target memory. -show may-write-registers -- Show permission to write into registers. -show mem -- Memory regions settings. -show mem inaccessible-by-default -- Show handling of unknown memory regions. -show mi-async -- Show whether MI asynchronous mode is enabled. -show mpx -- Show Intel Memory Protection Extensions specific variables. -show multiple-symbols -- Show how the debugger handles ambiguities in expressions. -show non-stop -- Show whether gdb controls the inferior in non-stop mode. -show observer -- Show whether gdb controls the inferior in observer mode. -show opaque-type-resolution -- Show resolution of opaque struct/class/union types (if set before loading symbols). -show osabi -- Show OS ABI of target. -show output-radix -- Show default output radix for printing of values. -show overload-resolution -- Show overload resolution in evaluating C++ functions. -show pagination -- Show state of GDB output pagination. -show paths -- Current search path for finding object files. -show print, show pr, show p -- Generic command for showing print settings. -show print address -- Show printing of addresses. -show print array -- Show pretty formatting of arrays. -show print array-indexes -- Show printing of array indexes. -show print asm-demangle -- Show demangling of C++/ObjC names in disassembly listings. -show print characters -- Show limit on string chars to print. -show print demangle -- Show demangling of encoded C++/ObjC names when displaying symbols. -show print elements -- Show limit on array elements to print. -show print entry-values -- Show printing of function arguments at function entry. -show print finish -- Show whether `finish' prints the return value. -show print frame-arguments -- Show printing of non-scalar frame arguments. -show print frame-info -- Show printing of frame information. -show print inferior-events -- Show printing of inferior events (such as inferior start and exit). -show print max-depth -- Show maximum print depth for nested structures, unions, and arrays. -show print max-symbolic-offset -- Show the largest offset that will be printed in form. -show print memory-tag-violations -- Show printing of memory tag violations for pointers. -show print nibbles -- Show whether to print binary values in groups of four bits. -show print null-stop -- Show printing of char arrays to stop at first null char. -show print object -- Show printing of C++ virtual function tables. -show print pascal_static-members -- Show printing of pascal static members. -show print pretty -- Show pretty formatting of structures. -show print raw-frame-arguments -- Show whether to print frame arguments in raw form. -show print raw-values -- Show whether to print values in raw form. -show print repeats -- Show threshold for repeated print elements. -show print sevenbit-strings -- Show printing of 8-bit characters in strings as \nnn. -show print static-members -- Show printing of C++ static members. -show print symbol -- Show printing of symbol names when printing pointers. -show print symbol-filename -- Show printing of source filename and line number with . -show print symbol-loading -- Show printing of symbol loading messages. -show print thread-events -- Show printing of thread events (such as thread start and exit). -show print type -- Generic command for setting how types print. -show print type hex -- Show whether sizes and offsets of struct members are printed using hex notation. -show print type methods -- Show printing of methods defined in classes. -show print type nested-type-limit -- Show the number of recursive nested type definitions to print. -show print type typedefs -- Show printing of typedefs defined in classes. -show print union -- Show printing of unions interior to structures. -show print vtbl -- Show printing of C++ virtual function tables. -show prompt -- Show gdb's prompt. -show python -- Prefix command for python preference settings. -show python dont-write-bytecode -- Show whether the Python interpreter should avoid byte-compiling python modules. -show python ignore-environment -- Show whether the Python interpreter showlist ignore environment variables. -show python print-stack -- Show the mode of Python stack printing on error. -show radix -- Show the default input and output number radices. -show range-stepping -- Show whether target-assisted range stepping is enabled. -show ravenscar -- Prefix command for showing Ravenscar-specific settings. -show ravenscar task-switching -- Show whether support for GNAT Ravenscar tasks is enabled. -show record, show rec -- Show record options. -show record btrace -- Show record options. -show record btrace bts -- Show record btrace bts options. -show record btrace bts buffer-size -- Show the record/replay bts buffer size. -show record btrace cpu -- Show the cpu to be used for trace decode. -show record btrace pt -- Show record btrace pt options. -show record btrace pt buffer-size -- Show the record/replay pt buffer size. -show record btrace replay-memory-access -- Show what memory accesses are allowed during replay. -show record full -- Show record options. -show record full insn-number-max -- Show record/replay buffer limit. -show record full memory-query -- Show whether query if PREC cannot record memory change of next instruction. -show record full stop-at-limit -- Show whether record/replay stops when record/replay buffer becomes full. -show record function-call-history-size -- Show number of functions to print in "record function-call-history". -show record instruction-history-size -- Show number of instructions to print in "record instruction-history". -show remote -- Remote protocol specific variables. -show remote TracepointSource-packet -- Show current use of remote protocol `TracepointSource' (TracepointSource) packet. -show remote Z-packet -- Show use of remote protocol `Z' packets. -show remote access-watchpoint-packet -- Show current use of remote protocol `Z4' (access-watchpoint) packet. -show remote agent-packet -- Show current use of remote protocol `QAgent' (agent) packet. -show remote allow-packet -- Show current use of remote protocol `QAllow' (allow) packet. -show remote attach-packet -- Show current use of remote protocol `vAttach' (attach) packet. -show remote binary-download-packet, show remote X-packet -- Show current use of remote protocol `X' (binary-download) packet. -show remote breakpoint-commands-packet -- Show current use of remote protocol `BreakpointCommands' (breakpoint-commands) packet. -show remote btrace-conf-bts-size-packet -- Show current use of remote protocol `Qbtrace-conf:bts:size' (btrace-conf-bts-size) packet. -show remote btrace-conf-pt-size-packet -- Show current use of remote protocol `Qbtrace-conf:pt:size' (btrace-conf-pt-size) packet. -show remote catch-syscalls-packet -- Show current use of remote protocol `QCatchSyscalls' (catch-syscalls) packet. -show remote conditional-breakpoints-packet -- Show current use of remote protocol `ConditionalBreakpoints' (conditional-breakpoints) packet. -show remote conditional-tracepoints-packet -- Show current use of remote protocol `ConditionalTracepoints' (conditional-tracepoints) packet. -show remote ctrl-c-packet -- Show current use of remote protocol `vCtrlC' (ctrl-c) packet. -show remote disable-btrace-packet -- Show current use of remote protocol `Qbtrace:off' (disable-btrace) packet. -show remote disable-randomization-packet -- Show current use of remote protocol `QDisableRandomization' (disable-randomization) packet. -show remote enable-btrace-bts-packet -- Show current use of remote protocol `Qbtrace:bts' (enable-btrace-bts) packet. -show remote enable-btrace-pt-packet -- Show current use of remote protocol `Qbtrace:pt' (enable-btrace-pt) packet. -show remote environment-hex-encoded-packet -- Show current use of remote protocol `QEnvironmentHexEncoded' (environment-hex-encoded) packet. -show remote environment-reset-packet -- Show current use of remote protocol `QEnvironmentReset' (environment-reset) packet. -show remote environment-unset-packet -- Show current use of remote protocol `QEnvironmentUnset' (environment-unset) packet. -show remote exec-event-feature-packet -- Show current use of remote protocol `exec-event-feature' (exec-event-feature) packet. -show remote exec-file -- Show the remote pathname for "run". -show remote fast-tracepoints-packet -- Show current use of remote protocol `FastTracepoints' (fast-tracepoints) packet. -show remote fetch-register-packet, show remote p-packet -- Show current use of remote protocol `p' (fetch-register) packet. -show remote fork-event-feature-packet -- Show current use of remote protocol `fork-event-feature' (fork-event-feature) packet. -show remote get-thread-information-block-address-packet -- Show current use of remote protocol `qGetTIBAddr' (get-thread-information-block-address) packet. -show remote get-thread-local-storage-address-packet -- Show current use of remote protocol `qGetTLSAddr' (get-thread-local-storage-address) packet. -show remote hardware-breakpoint-limit -- Show the maximum number of target hardware breakpoints. -show remote hardware-breakpoint-packet -- Show current use of remote protocol `Z1' (hardware-breakpoint) packet. -show remote hardware-watchpoint-length-limit -- Show the maximum length (in bytes) of a target hardware watchpoint. -show remote hardware-watchpoint-limit -- Show the maximum number of target hardware watchpoints. -show remote hostio-close-packet -- Show current use of remote protocol `vFile:close' (hostio-close) packet. -show remote hostio-fstat-packet -- Show current use of remote protocol `vFile:fstat' (hostio-fstat) packet. -show remote hostio-open-packet -- Show current use of remote protocol `vFile:open' (hostio-open) packet. -show remote hostio-pread-packet -- Show current use of remote protocol `vFile:pread' (hostio-pread) packet. -show remote hostio-pwrite-packet -- Show current use of remote protocol `vFile:pwrite' (hostio-pwrite) packet. -show remote hostio-readlink-packet -- Show current use of remote protocol `vFile:readlink' (hostio-readlink) packet. -show remote hostio-setfs-packet -- Show current use of remote protocol `vFile:setfs' (hostio-setfs) packet. -show remote hostio-unlink-packet -- Show current use of remote protocol `vFile:unlink' (hostio-unlink) packet. -show remote hwbreak-feature-packet -- Show current use of remote protocol `hwbreak-feature' (hwbreak-feature) packet. -show remote install-in-trace-packet -- Show current use of remote protocol `InstallInTrace' (install-in-trace) packet. -show remote interrupt-on-connect -- Show whether interrupt-sequence is sent to remote target when gdb connects to. -show remote interrupt-sequence -- Show interrupt sequence to remote target. -show remote kill-packet -- Show current use of remote protocol `vKill' (kill) packet. -show remote library-info-packet -- Show current use of remote protocol `qXfer:libraries:read' (library-info) packet. -show remote library-info-svr4-packet -- Show current use of remote protocol `qXfer:libraries-svr4:read' (library-info-svr4) packet. -show remote memory-map-packet -- Show current use of remote protocol `qXfer:memory-map:read' (memory-map) packet. -show remote memory-read-packet-size -- Show the maximum number of bytes per memory-read packet. -show remote memory-tagging-feature-packet -- Show current use of remote protocol `memory-tagging-feature' (memory-tagging-feature) packet. -show remote memory-write-packet-size -- Show the maximum number of bytes per memory-write packet. -show remote multiprocess-feature-packet -- Show current use of remote protocol `multiprocess-feature' (multiprocess-feature) packet. -show remote no-resumed-stop-reply-packet -- Show current use of remote protocol `N stop reply' (no-resumed-stop-reply) packet. -show remote noack-packet -- Show current use of remote protocol `QStartNoAckMode' (noack) packet. -show remote osdata-packet -- Show current use of remote protocol `qXfer:osdata:read' (osdata) packet. -show remote pass-signals-packet -- Show current use of remote protocol `QPassSignals' (pass-signals) packet. -show remote pid-to-exec-file-packet -- Show current use of remote protocol `qXfer:exec-file:read' (pid-to-exec-file) packet. -show remote program-signals-packet -- Show current use of remote protocol `QProgramSignals' (program-signals) packet. -show remote query-attached-packet -- Show current use of remote protocol `qAttached' (query-attached) packet. -show remote read-aux-vector-packet -- Show current use of remote protocol `qXfer:auxv:read' (read-aux-vector) packet. -show remote read-btrace-conf-packet -- Show current use of remote protocol `qXfer:btrace-conf' (read-btrace-conf) packet. -show remote read-btrace-packet -- Show current use of remote protocol `qXfer:btrace' (read-btrace) packet. -show remote read-fdpic-loadmap-packet -- Show current use of remote protocol `qXfer:fdpic:read' (read-fdpic-loadmap) packet. -show remote read-sdata-object-packet -- Show current use of remote protocol `qXfer:statictrace:read' (read-sdata-object) packet. -show remote read-siginfo-object-packet -- Show current use of remote protocol `qXfer:siginfo:read' (read-siginfo-object) packet. -show remote read-watchpoint-packet -- Show current use of remote protocol `Z3' (read-watchpoint) packet. -show remote reverse-continue-packet -- Show current use of remote protocol `bc' (reverse-continue) packet. -show remote reverse-step-packet -- Show current use of remote protocol `bs' (reverse-step) packet. -show remote run-packet -- Show current use of remote protocol `vRun' (run) packet. -show remote search-memory-packet -- Show current use of remote protocol `qSearch:memory' (search-memory) packet. -show remote set-register-packet, show remote P-packet -- Show current use of remote protocol `P' (set-register) packet. -show remote set-working-dir-packet -- Show current use of remote protocol `QSetWorkingDir' (set-working-dir) packet. -show remote software-breakpoint-packet -- Show current use of remote protocol `Z0' (software-breakpoint) packet. -show remote startup-with-shell-packet -- Show current use of remote protocol `QStartupWithShell' (startup-with-shell) packet. -show remote static-tracepoints-packet -- Show current use of remote protocol `StaticTracepoints' (static-tracepoints) packet. -show remote supported-packets-packet -- Show current use of remote protocol `qSupported' (supported-packets) packet. -show remote swbreak-feature-packet -- Show current use of remote protocol `swbreak-feature' (swbreak-feature) packet. -show remote symbol-lookup-packet -- Show current use of remote protocol `qSymbol' (symbol-lookup) packet. -show remote system-call-allowed -- Show if the host system(3) call is allowed for the target. -show remote target-features-packet -- Show current use of remote protocol `qXfer:features:read' (target-features) packet. -show remote thread-events-packet -- Show current use of remote protocol `QThreadEvents' (thread-events) packet. -show remote thread-options-packet -- Show current use of remote protocol `QThreadOptions' (thread-options) packet. -show remote threads-packet -- Show current use of remote protocol `qXfer:threads:read' (threads) packet. -show remote trace-buffer-size-packet -- Show current use of remote protocol `QTBuffer:size' (trace-buffer-size) packet. -show remote trace-status-packet -- Show current use of remote protocol `qTStatus' (trace-status) packet. -show remote traceframe-info-packet -- Show current use of remote protocol `qXfer:traceframe-info:read' (traceframe-info) packet. -show remote unwind-info-block-packet -- Show current use of remote protocol `qXfer:uib:read' (unwind-info-block) packet. -show remote verbose-resume-packet -- Show current use of remote protocol `vCont' (verbose-resume) packet. -show remote verbose-resume-supported-packet -- Show current use of remote protocol `vContSupported' (verbose-resume-supported) packet. -show remote vfork-event-feature-packet -- Show current use of remote protocol `vfork-event-feature' (vfork-event-feature) packet. -show remote write-siginfo-object-packet -- Show current use of remote protocol `qXfer:siginfo:write' (write-siginfo-object) packet. -show remote write-watchpoint-packet -- Show current use of remote protocol `Z2' (write-watchpoint) packet. -show remoteaddresssize -- Show the maximum size of the address (in bits) in a memory packet. -show remotecache -- Show cache use for remote targets. -show remoteflow -- Show use of hardware flow control for remote serial I/O. -show remotelogbase -- Show numerical base for remote session logging. -show remotelogfile -- Show filename for remote session recording. -show remotetimeout -- Show timeout limit to wait for target to respond. -show remotewritesize -- Show the maximum number of bytes per memory write packet (deprecated). -show schedule-multiple -- Show mode for resuming threads of all processes. -show scheduler-locking -- Show mode for locking scheduler during execution. -show script-extension -- Show mode for script filename extension recognition. -show serial -- Show default serial/parallel port configuration. -show serial baud -- Show baud rate for remote serial I/O. -show serial parity -- Show parity for remote serial I/O. -show solib-search-path -- Show the search path for loading non-absolute shared library symbol files. -show source -- Generic command for showing source settings. -show source open -- Show whether GDB should open source files. -show stack-cache -- Show cache use for stack access. -show startup-quietly -- Show whether GDB should start up quietly. -show startup-with-shell -- Show use of shell to start subprocesses. -show step-mode -- Show mode of the step operation. -show stop-on-solib-events -- Show stopping for shared library events. -show struct-convention -- Show the convention for returning small structs. -show style -- Style-specific settings. -show style address, show style disassembler address -- Address display styling. -show style address background -- Show the background color for this property. -show style address foreground -- Show the foreground color for this property. -show style address intensity -- Show the display intensity for this property. -show style disassembler -- Style-specific settings for the disassembler. -show style disassembler comment -- Disassembler comment display styling. -show style disassembler comment background -- Show the background color for this property. -show style disassembler comment foreground -- Show the foreground color for this property. -show style disassembler comment intensity -- Show the display intensity for this property. -show style disassembler enabled -- Show whether disassembler output styling is enabled. -show style disassembler immediate -- Disassembler immediate display styling. -show style disassembler immediate background -- Show the background color for this property. -show style disassembler immediate foreground -- Show the foreground color for this property. -show style disassembler immediate intensity -- Show the display intensity for this property. -show style disassembler mnemonic -- Disassembler mnemonic display styling. -show style disassembler mnemonic background -- Show the background color for this property. -show style disassembler mnemonic foreground -- Show the foreground color for this property. -show style disassembler mnemonic intensity -- Show the display intensity for this property. -show style disassembler register -- Disassembler register display styling. -show style disassembler register background -- Show the background color for this property. -show style disassembler register foreground -- Show the foreground color for this property. -show style disassembler register intensity -- Show the display intensity for this property. -show style enabled -- Show whether CLI is enabled. -show style filename -- Filename display styling. -show style filename background -- Show the background color for this property. -show style filename foreground -- Show the foreground color for this property. -show style filename intensity -- Show the display intensity for this property. -show style function, show style disassembler symbol -- Function name display styling. -show style function background -- Show the background color for this property. -show style function foreground -- Show the foreground color for this property. -show style function intensity -- Show the display intensity for this property. -show style highlight -- Highlight display styling. -show style highlight background -- Show the background color for this property. -show style highlight foreground -- Show the foreground color for this property. -show style highlight intensity -- Show the display intensity for this property. -show style metadata -- Metadata display styling. -show style metadata background -- Show the background color for this property. -show style metadata foreground -- Show the foreground color for this property. -show style metadata intensity -- Show the display intensity for this property. -show style sources -- Show whether source code styling is enabled. -show style title -- Title display styling. -show style title background -- Show the background color for this property. -show style title foreground -- Show the foreground color for this property. -show style title intensity -- Show the display intensity for this property. -show style tui-active-border -- TUI active border display styling. -show style tui-active-border background -- Show the background color for this property. -show style tui-active-border foreground -- Show the foreground color for this property. -show style tui-border -- TUI border display styling. -show style tui-border background -- Show the background color for this property. -show style tui-border foreground -- Show the foreground color for this property. -show style tui-current-position -- Show whether to style text highlighted by the TUI's current position indicator. -show style variable -- Variable name display styling. -show style variable background -- Show the background color for this property. -show style variable foreground -- Show the foreground color for this property. -show style variable intensity -- Show the display intensity for this property. -show style version -- Version string display styling. -show style version background -- Show the background color for this property. -show style version foreground -- Show the foreground color for this property. -show style version intensity -- Show the display intensity for this property. -show substitute-path -- Show one or all substitution rules rewriting the source directories. -show suppress-cli-notifications -- Show whether printing notifications on CLI is suppressed. -show sysroot, show solib-absolute-prefix -- Show the current system root. -show target-charset -- Show the target character set. -show target-file-system-kind -- Show assumed file system kind for target reported file names. -show target-wide-charset -- Show the target wide character set. -show tcp -- TCP protocol specific variables. -show tcp auto-retry -- Show auto-retry on socket connect. -show tcp connect-timeout -- Show timeout limit in seconds for socket connection. -show tdesc -- Show target description specific variables. -show tdesc filename -- Show the file to read for an XML target description. -show trace-buffer-size -- Show requested size of trace buffer. -show trace-commands -- Show state of GDB CLI command tracing. -show trace-notes -- Show the notes string to use for current and future trace runs. -show trace-stop-notes -- Show the notes string to use for future tstop commands. -show trace-user -- Show the user name to use for current and future trace runs. -show trust-readonly-sections -- Show mode for reading from readonly sections. -show tui -- TUI configuration variables. -show tui active-border-mode -- Show the attribute mode to use for the active TUI window border. -show tui border-kind -- Show the kind of border for TUI windows. -show tui border-mode -- Show the attribute mode to use for the TUI window borders. -show tui compact-source -- Show whether the TUI source window is compact. -show tui mouse-events -- Show whether TUI mode handles mouse clicks. -show tui tab-width -- Show the tab width, in characters, for the TUI. -show unwind-on-signal, show unwindonsignal -- Show unwinding of stack if a signal is received while in a call dummy. -show unwind-on-terminating-exception -- Show unwinding of stack if std::terminate() is called while in a call dummy. -show unwind-on-timeout -- Show unwinding of stack if a timeout occurs while in a call dummy. -show use-coredump-filter -- Show whether gcore should consider /proc/PID/coredump_filter. -show use-deprecated-index-sections -- Show whether to use deprecated gdb_index sections. -show user -- Show definitions of non-python/scheme user defined commands. -show values -- Elements of value history around item number IDX (or last ten). -show varsize-limit -- Show the maximum number of bytes allowed in a variable-size object. -show verbose -- Show verbosity. -show version -- Show what version of GDB this is. -show warranty -- Various kinds of warranty you do not have. -show watchdog -- Show watchdog timer. -show width -- Show number of characters where GDB should wrap lines of its output. -show write -- Show writing into executable and core files. - -Command class: support - -add-auto-load-safe-path -- Add entries to the list of directories from which it is safe to auto-load files. -add-auto-load-scripts-directory -- Add entries to the list of directories from which to load auto-loaded scripts. -alias -- Define a new command that is an alias of an existing command. -apropos -- Search for commands matching a REGEXP. -define -- Define a new command name. Command name is argument. -define-prefix -- Define or mark a command as a user-defined prefix command. -demangle -- Demangle a mangled name. -document -- Document a user-defined command or user-defined alias. -dont-repeat -- Don't repeat this command. -down-silently -- Same as the `down' command, but does not print anything. -echo -- Print a constant string. Give string as argument. -help, h -- Print list of commands. -if -- Execute nested commands once IF the conditional expression is non zero. -interpreter-exec -- Execute a command in an interpreter. -make -- Run the ``make'' program using the rest of the line as arguments. -new-ui -- Create a new UI. -overlay, ov, ovly -- Commands for debugging overlays. -overlay auto -- Enable automatic overlay debugging. -overlay list-overlays -- List mappings of overlay sections. -overlay load-target -- Read the overlay mapping state from the target. -overlay manual -- Enable overlay debugging. -overlay map-overlay -- Assert that an overlay section is mapped. -overlay off -- Disable overlay debugging. -overlay unmap-overlay -- Assert that an overlay section is unmapped. -pipe, | -- Send the output of a gdb command to a shell command. -quit, exit, q -- Exit gdb. -shell, ! -- Execute the rest of the line as a shell command. -source -- Read commands from a file named FILE. -up-silently -- Same as the `up' command, but does not print anything. -while -- Execute nested commands WHILE the conditional expression is non zero. - -Command class: text-user-interface - -+ -- Scroll window forward. -- -- Scroll window backward. -< -- Scroll window text to the left. -> -- Scroll window text to the right. -tui -- Text User Interface commands. -tui disable -- Disable TUI display mode. -tui enable -- Enable TUI display mode. -tui focus, fs, focus -- Set focus to named window or next/prev window. -tui layout, layout -- Change the layout of windows. -tui layout asm -- Apply the "asm" layout. -tui layout next -- Apply the next TUI layout. -tui layout prev -- Apply the previous TUI layout. -tui layout regs -- Apply the TUI register layout. -tui layout split -- Apply the "split" layout. -tui layout src -- Apply the "src" layout. -tui new-layout -- Create a new TUI layout. -tui refresh, refresh -- Refresh the terminal display. -tui reg -- TUI command to control the register window. -tui window -- Text User Interface window commands. -tui window height, wh, winheight -- Set or modify the height of a specified window. -tui window width, winwidth -- Set or modify the width of a specified window. -update -- Update the source window to display the current execution point. - -Command class: tracepoints - -actions -- Specify the actions to be taken at a tracepoint. -collect -- Specify one or more data items to be collected at a tracepoint. -end -- Ends a list of commands or actions. -passcount -- Set the passcount for a tracepoint. -tdump -- Print everything collected at the current tracepoint. -teval -- Specify one or more expressions to be evaluated at a tracepoint. -tfind -- Select a trace frame. -tfind end, tfind none -- De-select any trace frame and resume 'live' debugging. -tfind line -- Select a trace frame by source line. -tfind outside -- Select a trace frame whose PC is outside the given range (exclusive). -tfind pc -- Select a trace frame by PC. -tfind range -- Select a trace frame whose PC is in the given range (inclusive). -tfind start -- Select the first trace frame in the trace buffer. -tfind tracepoint -- Select a trace frame by tracepoint number. -tsave -- Save the trace data to a file. -tstart -- Start trace data collection. -tstatus -- Display the status of the current trace data collection. -tstop -- Stop trace data collection. -tvariable -- Define a trace state variable. -while-stepping, stepping, ws -- Specify single-stepping behavior at a tracepoint. - -Command class: user-defined - - -Unclassified commands - -add-inferior -- Add a new inferior. -clone-inferior -- Clone inferior ID. -eval -- Construct a GDB command and then evaluate it. -flash-erase -- Erase all flash memory regions. -function -- Placeholder command for showing help on convenience functions. -function _any_caller_is -- Check all calling function's names. -function _any_caller_matches -- Compare all calling function's names with a regexp. -function _as_string -- Return the string representation of a value. -function _caller_is -- Check the calling function's name. -function _caller_matches -- Compare the calling function's name with a regexp. -function _cimag -- Extract the imaginary part of a complex number. -function _creal -- Extract the real part of a complex number. -function _gdb_maint_setting -- $_gdb_maint_setting - returns the value of a GDB maintenance setting. -function _gdb_maint_setting_str -- $_gdb_maint_setting_str - returns the value of a GDB maintenance setting as a string. -function _gdb_setting -- $_gdb_setting - returns the value of a GDB setting. -function _gdb_setting_str -- $_gdb_setting_str - returns the value of a GDB setting as a string. -function _isvoid -- Check whether an expression is void. -function _memeq -- $_memeq - compare bytes of memory. -function _regex -- $_regex - check if a string matches a regular expression. -function _shell -- $_shell - execute a shell command and return the result. -function _streq -- $_streq - check string equality. -function _strlen -- $_strlen - compute string length. -jit-reader-load -- Load FILE as debug info reader and unwinder for JIT compiled code. -jit-reader-unload -- Unload the currently loaded JIT debug info reader. -remove-inferiors -- Remove inferior ID (or list of IDs). -unset -- Complement to certain "set" commands. -unset environment -- Cancel environment variable VAR for the program. -unset exec-wrapper -- Disable use of an execution wrapper. -unset substitute-path -- Delete one or all substitution rules rewriting the source directories. -unset tdesc -- Unset target description specific variables. -unset tdesc filename -- Unset the file to read for an XML target description.